A320NeoV2 FLEX engine performance is too low

Sim Update 15 Beta Aircraft & Systems
, ,
1

:wave: Thank you using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.

Are you using Developer Mode or made changes in it?

No

Which aircraft are you using that experiences this issue?

A320NeoV2

Brief description of the issue:

When calculating take off performance, the FLEX performance during take off is too low. Aircraft needs 3/4 of runway length to take off

Provide Screenshot(s)/video(s) of the issue encountered:

Detailed steps to reproduce the issue encountered:

PC specs and peripheral set up:

Are you using DX11 or DX12?

Are you using DLSS?

:loudspeaker: For anyone who wants to contribute to this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

Are you using DX11 or DX12?

Are you using DLSS?

If relevant, provide additional screenshots/video:

2

I noted this, too, but I am in, no way, well versed in operating the A320neo, so I assumed the issue was me doing something incorrectly in my setup procedures.

3

You may want to add how long is the runway, because 3/4 of a 2300mts runway is not the same as 3/4 of a 4000mts runway.
And your flaps configuration, outside temp, airport altitud, packs on/off, payload.

1 Like
4

Runway length does not matter in this case

I also fly the Fenix A320 and it’s FLEX performance at same value is much better than the Inibuild A320NeoV2

5

well, the performance has become a bit worse for me again, and the sound is much too loud to turn down the sound knobs a bit