A330 - Engine failure immediately after startup under cold temperature condition

ISSUE DESCRIPTION

Description of the issue:
Everytime starting the engines in the inibuilds A330(GE or RR) with negative dregrees temperature outside, the engine will shut down after a short period of time. Only to make sure → all Engine Pumps are on in the overhead panel. Therfore, the aircraft is unflyable right now with real weather. The interesting part is, that I am not able to restart the engine after this happened.

If applicable, which aircraft is experiencing this issue:
Inibuilds A330

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
Yes

FREQUENCY OF ISSUE

How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Everytime with negative outside temperatures

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

  1. Start the Engines (normal procedure with APU )
  2. After engine start, switch off APU, Engine Start switch to NORM.
  3. Wait … → Engines will shut down.

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant:
Saitek X52

[PC Only] Are you using Developer Mode or have you made any changes to it?
No

[PC, MSFS 2020 Only] Are you using DX11 or DX12?
MSFS 2024

[PC Only] What GPU (Graphics Card) do you use?
RTX 4070 Super

[PC Only] What other relevant PC specs can you share?

MEDIA

Please add a screenshot or video of the issue occurring.

[END OF FIRST USER REPORT]


:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
•

Idk if its the same issue with the A400M currently but make sure that the ignition switch is in the start/ignition location and check that way. I have a funny feeling they may have copied and pasted some of the avionics from the A400 to the A320.

Thank you for the hint. Will try it.
Do you know whether inibuilds is aware of this already?

Same here and very annoying. I tried everything and the engines just turn off with the sim saying ‘‘engine malfunction’’. Lot of time configuring the FMGC and in the end I can’t even turning on the engines. Terrible sim at this point.

I’m experiencing the same issue. I’m currently flying the iniBuilds A350, and sometimes, even when I don’t do anything, I get the message: “Aircraft system malfunction Engine malfunction” after a few minutes, and the engines shut down completely. I’ve encountered this issue many times already.

Moderator Edit: Moved from a Joby-S4 bug report to this one as, although this bug report is for the A330, the A350 is closer to the A330 than the Joby! :slightly_smiling_face:

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
• I have the same problem. It is reproducable. I have to re-attach the GPU and start the process all over again

Title updated for easier identification when searching for the issue

I am getting engine spooling to about 400 deg EGT but they won’t fire, as if there is no fuel being injected. As soon as I disable live weather and OAT is above 0 they fire and work normally even after reloading live weather with negative OAT.

Welcome into the winter season!

it happened to me two days ago in Zurich with FlightFX Citation X: temperature -3 ice fog and rain.

Fix n.1: switch on engine anti-ice as soon as engine starts, don’t leave thrust on IDLE to keep engine warm.

Fix n.2: turn off engine failures in the assistance options.

Issue should be fixed in the last SU7 Beta.
Continuing the discussion from Release Notes - SU7.2 Beta 1.9.23.0 - October 28, 2026: