Hi there. In both Analogue Bonanza and Baron I can’t get RNAV to work. I have navigation source set to NAV (not GPS), RNAV correctly configured (three data fields and RNAV mode selected). HSI source is flicked to RNAV. However, Autopilot is not following the radial set on HSI. Autopiolot is set to NAV mode but aircraft does not respond. Anyone with similar problem?
I have all add-ons switched off
Thank you,
Bart
hello !
does your gps is set to vloc (using cdi key) ? wich avionics are you using and are installed (TDS or pms50 maybe, WT … ) ? all up to date ?
All is set to VLOCK with CDI key. I am using TDSXi. All is up to date.
oh I see , you speak about the RNAV from the kns81 ? " RNAV correctly configured (three data fields and RNAV mode selected)." as you can read in the FAQ from the manual. Due to sim limitation, atm it s not possible to track the kns81 as a nav source and even if it work fine and is great it s most likely a nav aid
to use as indicative than for automated procedure
Thank you very much NiKo! I don’t know how I missed it. I must have read that manual 3 times looking for it. Thanks mate!
1 Like