How do i assign different command/buttons direct to Passenger Views Left/Right, given that in the Options-> Commands-> Fixed Camera you can assign commands to Fixed camera external only up to 10, and the two Passengers views are assigned to External 12 and 13 respectively?
Namely, i do not find them in the Commands menu, so I can not assign them to any key on the keyboard / joystick button?
Any solution/suggestion?
Thanks for help
I´m interested in that too.
I want a quick way to access those views, and in asignments aparently you can only create a quick launch method for views up to number 10, and those are 12 and 13…
Anybody knows how to do it?
You can set your own internal views using the Cntr-Alt-Num command.
Using the arrows keys & mouse, move the camera to the position and angle required, then press (for example) Cntrl-Alt-1. This sets the view. To go back to this view at any time, press Alt-1. Repeat for Cntrl-Alt-2 etc (up to 0).
Each plane has its own settings, so you need to repeat for each one.
I think he wants to switch to a wing view in cockpit mode.
There is a YouTube video that shows how to set up wing views to 1~10.
In cockpit mode you have to edit the camera.cfg and set the default cockpit cam position to the passenger room where the passenger windows are.
Then move to your desired view and safe it with ctrl+alt+1~10.
Then set the camera.cfg back and you have your wing view in cockpit mode.
You’re right - this occured to me late last night, and I was going to add to my post but you beat me to it!
Thanks so much to both of you.
That´s exactly what I was looking for.
Hallo, how do you “navigate” throught the airplane to arrive to the passengeres window? Which buttons do you press? (I am still a bit confused about how to navigate…)
Thanks for hel
namely, I’ve managed to positionate the view into the middle of my A320 (by changing the camersa file, as described) but now I can not zoom the view outside the passenger windows and set it proprely…could someone describe how to do it step-by-step?
Thanks for help
If you changed the default cockpit view (and before you change it back to the original setting), the controls used for moving around the cockpit should work, for example the mouse wheel to zoom, and arrow keys to move. Having set up the view you want, press Ctrl-Alt-1 to set the view. Repeat (using 2,3 etc) for any other views you want. Then change back to the original values in the cfg file.
Now pressing Alt-1, Alt-2 etc should take you to the views you set up, and F or Ctrl-1 (for example) should bring you back into the cockpit.
Thanks, but I’ve already knew that…the problem is that sooming with the mouse I still see the entire passenger window from inside and I am not able to zoom out more and see engine/wing as I would like…namely it deos not zoom any more…