ATR 72/42 the Torque is to high at "flight idle"

Bug Reporting Hub Aircraft & Systems
, , ,
1

Screenshot_2023-05-22-08-13-59-66_40deb401b9ffe8e1df2f1cc5ba480b12
Screenshot_2023-05-22-08-13-59-66_40deb401b9ffe8e1df2f1cc5ba480b121080Ă—2400 180 KB

:wave: Thank you for using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.

Are you using Developer Mode or made changes in it?

No
Have you disabled/removed all your mods and addons?
Yeah
Which aircraft are you reporting an issue about? (Please also add the proper tag for it)
ATR 42/72
Brief description of the issue:
The Torque value is to high when you set the Powerlevers to “Flight Idle” Position. In real it should be 0% Torque at “Flight Idle”
Provide Screenshot(s)/video(s) of the issue encountered:
I Upload a Photo from an ATR with an efis Cockpit.

Detailed steps to reproduce the issue encountered:

Set during flight the Powerlevers to “Flight Idle” and watch the Torque value. It is now to high it should be around 0 % . This is also the reason why it is so hard to slow down the plane ,special If the plane is not so heavy.

Another note ;while i set the Powerlevers to Flight Idle and If i hold the Button on my Xbox Controller for decrease power, the Torque is falling a littlerand If i leave the Button the Torque goes up again

PC specs and/or peripheral set up if relevant:

Xbox series X and im using the Xbox Controller
Build Version # when you first started experiencing this issue:

Since launch of the plane

:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

2

That looks like the cockpits of the old ones I flew back in the 90s. I sure didn’t remember much. I have had fun learning the new glass 600s but!
The displays are tiny and difficult to brighten using the buttons under them. The altitude is dim and tiny. The course readout is dim and tiny. The rate of descent/climb needle is dim and tiny. And if you zoom the screens, you can’t see out the window.
Im typed in the ATR, flew it for a year and found it to be a decent airplane with a lot of oddities. We would climb up through the forward baggage compartment to board and deplane. And hotel mode? Seldom used.

3

Im not a pilot. I just found this Picture from a Forum that should show the Torque at flight idle. In the Picture you can see the Powerlevers at flight idle Position and Torque is 0% left engine and 2% right engine