The propellers are running as you can see in the follwing screenshot …
… but no hydraulics and no gens. Any idea what went wrong?
Probably this helps.
Hi, there are currently several bugs relating to the ATR Hydraulics systems. Some of these results may be helpful: Search results for 'Atr no hydraulic #bugs' - Microsoft Flight Simulator Forums 
1 Like
Thank you. Just by chance everything is probably ok, and I just miss some blue OK Lights where there are none?
I don’t have the ATR so I don’t know anything about how it works, sorry! Hopefully someone else will be able to help you
I am testing her with this configuration and on my way to rwy I have no problems so far. But I am confused because I remember there were these “blue lights” before.
Can you check this page to see ACW generators status ?
1 Like
I tested and taxi to rwy and started without a problem. The blue ok lights seem to be disappeared. Don’t know where they are, but it really confused me!
Seems to me that the ACW system is not correctly simulated : NO ACW FAULT indication on system page , no pushbutton FAULT indication on OVHD panel …
But … NP’s are at 64.7% and ACW Generators are available if NP is above 66%.
Move PL and see what happens.
I am not in the ATR right now so I cannot test it. Btw what is “PL”? And I flew from EHAM to EDDH with this configuration.
I have same problem, I only get it when taxiing, I find it happens when throttle is at idle, I get round it by having throttle just above idle and fault goes away, not ideal but I now treat it as a game and not a simulator
Interesting. I will look into next time I use ATR, but since ATR got most often ATC muted I am not sure when I will fly her again.
PL = Power Lever
Same issue here. If I leave my PL at idle, all those errors show.
Same issue here on X-box, NP% drops below 64/65.
you have the gate set to ground?
[quote=“Rob8497, post:17, topic:611775, full:true”]
What do you mean?
[/quote]What do you mean by that?
If you mean the PL to ground idle the answer is yes.