B747 - Horizontal stabilizer position

[spottersim]

ISSUE DESCRIPTION

Description of the issue: The horizontal stabilizer seems to be positioned too far nose down compared to the real aircraft. The trim range also seems incorrect, with a suspected incorrect neutral position. Attached screenshots show full range of deflection. Second picture is at 15 units (full up), but looks like neutral. Check irl images to verify position and also dihedral angle of the horizontal stabilizer, as it does not appear angled enough.

FREQUENCY OF ISSUE

every time on sim load

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

1. Load B748
2. trim for takeoff
3. Compare trim setting to images of B748 ready to depart
4. Compare landing trim to images of landing B748, focusing on the THS position

YOUR SETTINGS

[PC Only] Are you using Developer Mode or have you made any changes to it?

DevMode on

MEDIA

Full DOWN

Full UP

[spottersim]

https://www.jetphotos.com/photo/11806917

If the sim THS setting were correct, this aircraft would be landing with max nose up trim…

[spottersim]

FMC trim set:

This is what it should look like: Boeing 747-830 Lufthansa D-ABYA Large - AirTeamImages.com

In sim, this would be max nose down trim.

In cruise: