Beech C90 won't take flight plan

ISSUE DESCRIPTION

Description of the issue:
Will not take a flight plan

If applicable, which aircraft is experiencing this issue:

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
C90

FREQUENCY OF ISSUE

How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Always

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

1.Make a flight plan
2.Try loading it to thae avioics
3.Still says no flight plan loaded

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
I have no mods
What peripherals are you using, if relevant:
Honeycomb alpha, bravo

[PC Only] Are you using Developer Mode or have you made any changes to it?
no

[PC, MSFS 2020 Only] Are you using DX11 or DX12?
DX11

[PC Only] What GPU (Graphics Card) do you use?

[PC Only] What other relevant PC specs can you share?

MEDIA

Please add a screenshot or video of the issue occurring.

[END OF FIRST USER REPORT]


:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
•

Do you have the same issue if you follow the OP’s steps to reproduce it?
• Yes. Flight plan from tablet will not copy over to the aircraft.

Provide extra information to complete the original description of the issue:
• There is no way to fly a autopilot route at this time, with this aircraft.

If relevant, provide additional screenshots/video:
•

Flightplan can be manually entered in the FMS.
Unfortunately the autopilot seems broken though. Can not get it to engage any lateral mode (heading/nav) or vertical mode.
Only what seems to be a roll/pitch mode with no FMA displayed.
Seems like the PFD/MFD is not connected to the FMS properly as well.

I have successfully flown this plane with autopilot in both lateral and vertical mode.
It does struggle with capturing FLC speed though.

Interesting - my experience was only based on a single experience in career mode, where I was unable to get any modes to engage. Will test it further in free flight.

Seems like one of the most complete aircraft in career right now.
I wont dare use it for medivac though. The nosedive to catch FLC at a higher speed than set, isnt optimal for the guy on the stretcher. lol

Just spawned in free flight and looks like i get proper FMA from the autopilot now. Have experienced other planes being a bit extra buggy on first load, so perhaps it was just that.

Haven’t had time to test it in the air yet, but from previous experience with the Proline 21 in the CJ4, VS-mode has always been the “safer” mode to put it in when changing things, and you can then swap to FLC once established at approximately the right settings.

According to real life pilots, FLC is the safest mode in climb.
VS mode is mostly used in descent.

The CJ4 is actually following the FLC perfectly. (If they haven`t broken it in FS2024)

I have had all the sytems work fine in free flight, but flight plan will not be transferred over, nor will the FLC or other autopilot systems work in Career mode.

3 Likes