Beech G36 Various issues

ISSUE DESCRIPTION

Description of the issue:

  • Unusable for career because deploying flaps instantly gives overspeed warning.
  • COM panel lights (little green triangles) appear to be linked to the landing gear switch for some reason. They start out solid green (as expected). Moving the gear switch up (on the ground or in the air) will cause the lights to begin flashing. Moving the gear switch down stops the flashing, but the lights may be on or off (seems to be whichever part of the “blink” state they were in whey you hit the gear switch).
  • PFD is linked to the Avionics switch. PFD display should come on with a battery master, not the Avionics master.
  • The top latch of the pilot vent window flickers, like a z-fighting issue. The bottom two hinges seem OK.
  • Yoke clickspot is too big when hidden. When the yoke is hidden, you still can’t click on the nav/beacon switches, instead you click on the invisible yoke, making it reappear.
  • Aux fuel pump switch INOP. Switch will highlight, but no tooltip and clicking does nothing.
  • Copilot avatar clips their knee into the throttle quadrant
  • EFB Seat layout graphic is incorrect, the boxes are in the wrong place and overlap.

If applicable, which aircraft is experiencing this issue:
Bonanza G36

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?

FREQUENCY OF ISSUE

How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Always

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant:

[PC Only] Are you using Developer Mode or have you made any changes to it?

[PC, MSFS 2020 Only] Are you using DX11 or DX12?

[PC Only] What GPU (Graphics Card) do you use?

[PC Only] What other relevant PC specs can you share?

MEDIA

Please add a screenshot or video of the issue occurring.

[END OF FIRST USER REPORT]


:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

2 Likes

Do you have the same issue if you follow the OP’s steps to reproduce it?
• Yes

Provide extra information to complete the original description of the issue:
• Exactly as described by the OP

If relevant, provide additional screenshots/video:

Hobbs meter still doesn’t work either.

I totally agree with everything described.

Some of the bugs are so obvious, like the yoke clickspot problem, that I can’t believe this plane was tested by anyone on the development team before the simulator was released.

And like these, there are many other obvious bugs throughout the simulator, affecting various planes, menus, settings, perfomance, textures, servers, career mode, etc.

Clearly the product is in Early Access and it is us, the players, who are doing the work of beta testers, and paying our own money. It’s a shame.

I agree to and can confirm all of the points the OP raised.

For example, the yoke visibility click area prevents interaction with other cockpit elements:

Do you have the same issue if you follow the OP’s steps to reproduce it?
• Yes

Provide extra information to complete the original description of the issue:
• All of the above plus more.

If relevant, provide additional screenshots/video:

Furthermore, the entire G1000 system seems like it isn’t fully associated with the aircraft. If you try to set the keybindings in the settings with the G36 selected, the G1000 section of the Instruments and Systems is missing all together. If you select the C172 or something else, the G1000 settings re-appear. As soon as you jump back to the G36, they are gone.

Noticed even with the yoke hidden the switches behind it are visible but not selectable. If you hover the mouse over them you only get the unhide/hide yoke option.

Some issues listed fixed in SU1. Please create seperate bug reports for issues: Release Notes - Microsoft Flight Simulator 2024 Sim Update 1 [1.3.23.0] Available Now