I recently purchased the Boeing flight yoke, all set up and working great except sometimes when I move the yoke my camera view begins to move. I have custom views mapped to a number pad and they still work fine. The yoke hat switch also works fine. All controls are assigned through MSFS and I am not using any additional software. Example: As I was climbing out of KLAS the view just starting panning up and I was looking at the overhead panel. I hit the #1 on my number pad which I have assigned to a straight ahead pilots eye custom view and the view reset. It’s like the camera wants to go in the direction that I am moving the yoke. Any ideas?
That’s the analog thumbstick on the right horn of the yoke - a very common issue is that it’s “noisy” and sends camera movements even when centered untouched. The solution is either set deadzones on the two thumbstick axes, or unbind it from camera movement entirely.
1 Like
Problem solved. Thank you!! Additional information to possibly help others. First I went to Control Panel - Devices and Printers - Right click on game control settings - click Boeing yoke - Properties which displays the calibration. When I moved the yoke back and forth the centered crosshairs in the box next to it (hat switch axis) also moved slightly. Went into sim, control options, camera, sensitivity and set a dead zone of 20% for both axis applied to the hat switch. Took off and flew around with no issues. Thank you again DrVenkman!
1 Like