Bravo throttle quadrant not working as before

Bug Reporting Hub Hardware & Peripherals
,
1

Since the last update my throttle quadrant is not working as before with some planes. I can’t select auto pilot anymore. Before update there was no problem.

2

I can’t assign HDG,NAV, APR, VS and IAS anymore. Gear light is’nt responding during flight with 50% of the planes. Very strange.

1 Like
3

Good day,
If you have tried this troubleshooting steps then nevermind. :slight_smile:

  1. Unplug the device, restart your computer. Once up shutdown then plug devices back in and reboot
  2. Check to make sure your binding did not disappear.
  3. Run the tool from Aerosoft for the Honeycomb devices (there is a video out there to help bind those buttons and LED’s

I hate you are having these problems and hope all will resolve quickly

4

Mine’s been fine so far, including autopilot in Citation Longitude and a couple random GA planes.

1 Like
5

Thanks PlanDig 7055042 for your answer, what i find strange that that the most of the planes are responding to the Honeycomb Bravo throttle quadrant. Every plane was bound and worked properly until yesterday after the upgrade. I shure will try the solution you brought up.
Thanks for that.
Sincereley, Walter

6

Hello Vibstronium, what do you mean in your answer? Did’nt your Bravo throttle worked fine?
Sincereley, Walter

7

That’s correct. I can use my throttle to control:

  • throttle
  • prop
  • mixture
  • spoilers
  • parking brakes (bound manually)
  • interior lights (bound manually)
  • pitot heat
  • gear
  • flaps
  • autopilot (everything I’ve tried so far)
    No problems encountered related to the throttle controls since sim update III yesterday.
8

You might want to list the specific planes that don’t work for you?

9

Dear Vibstronium, I have problems with following planes;
A320NEO
B 747, B787
Extra 330LT
Icon A5
JMB VL3
Sincereley, Walter

1 Like
10

Extra 330LT working ok here:

  • throttle works
  • prop works
  • mixture works
  • parking brake works
  • plane has no autopilot
11

JMB VL3 works:

  • throttle works
  • prop works
  • plane has no mixure
  • parking brake works
  • plane has no autopilot
12

Icon A5:

  • throttle works
  • plane has no prop pitch control
  • plane has no mixture
  • parking brake works
  • gear lever works
  • plane has no autopilot
13

It may be that you can’t turn on autopilot because these planes have no autopilot. Are you sure that this doesn’t work on planes that do have autopilot?

14

A320neo works:

  • throttles work (using 2-engine commercial config)
  • spoilers work
  • flaps work
  • parking brake works
  • autopilot works

Have you tried unplugging and replugging? Checked your bindings? Reinstalled the helper app?

15

Hi Vibstronium, i have done everything you mentioned except the reinstall of the helper app. I’m not shure what that is? Bindings are ok, everything workes fine. I can’t understand this. The autopilot is not the only thing that does’nt work, setting altitude, heading etc. And the weirdest thing is that not every plane is affected with this anomaly. Maybe other readers are seeing the light that could help me.
Sincerely, Walter