ISSUE DESCRIPTION
Description of the issue:
When using the Auto Shutdown key in the Cessna 152, the Engine Driven Fuel Pump is disabled. Starting the plane from dark and cold in this situation is no longer possible after this state, there is no way to enable the fuel pump except in the developer console.
Breakers could also trip which cannot be pushed in as well.
FREQUENCY OF ISSUE
Occurs on every attempt.
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
-
Load into the Cessna 152 at any airport on parking.
-
Enter aircraft and press the auto shutdown key.
-
Do the Starting Engine checklist.
The issue is that autoshutdown disables the engine driven fuel pump. You cannot bind a key to enable the fuel pump in the C152. In the actual C152 the fuel is gravity fed not through a fuel pump.
Additionally there are no ways to push in any tripped breakers, such as the starter.
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are you using, if relevant:
[PC Only] Are you using Developer Mode or have you made any changes to it?
Using developer mode to debug, not needed to reproduce.
[PC Only] What GPU (Graphics Card) do you use?
RX7600
[PC Only] What other relevant PC specs can you share?
AMD CPU
MEDIA
Looking at the behaviors for the fuel system: After AutoShutDown
After AutoStart
