Using the template below will greatly help the team reproduce the issue and ease the process of fixing it. Before posting, search for an existing report. If you are not sure it’s a bug, please first report in User Support Hub.
2 tags are required - add them in the tag section next to the title above:
Game Platform (Exampe: Steam, Xbox, MS Store):
steam
ISSUE DESCRIPTION
Description of the issue:
I have only seen this issue in the SR22. Tested the 172 and the issue is not there. I have “increase flaps” and “decrease flaps” set to the down and up motions on the Honeycomb Bravo flap lever. When using the flap lever, the flaps on the aircraft fully extend/retract. There is no way to move them one notch at a time. I also have this issue using key binds on my keyboard for these actions on this aircraft. Haven’t found another plane with this issue.
Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
yep
FREQUENCY OF ISSUE
How often does this occur for you? (Example: Just once, every time on sim load, intermittently)
every time
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue.
set control settings accordingly
use the flap handle
observe the position of flaps in the aircraft
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are currently plugged in? Please name all of them as there could be a potential conflict.
[PC Only] Are you using Developer Mode or have you made any changes to it?
no
[PC, MSFS 2020 Only] Are you using DX11 or DX12?
[PC Only] What GPU (Graphics Card) do you use?
[PC Only] What other relevant PC specs can you share?
MEDIA
Please add a screenshot or video of the issue occurring.
[END OF FIRST USER REPORT]
For anyone who wants to contribute on this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
•
Provide extra information to complete the original description of the issue:
•
If relevant, provide additional screenshots/video:
•
Do you have the same issue if you follow the OP’s steps to reproduce it?
• No
Provide extra information to complete the original description of the issue:
• I have a Honeycomb Bravo. As the OP didn’t state which aircraft they are flying, I will state that I am not seeing this issue on the C172 nor am I seeing it on the Dornier Seastar, which are the only two aircraft I’ve flown thus far.
If relevant, provide additional screenshots/video:
•
Thanks for your help! I just checked the 172 and it works fine there. So either it is an issue specific to the SR22 or in the course of quitting the sim and restarting it to get myself into the 172 it fixed itself.
Okay, I am definitely seeing the same issue with the SR22.
I’d re-write your title and make mention that the issue is, for the moment, specific to the SR22 and I’ll post another contribution backing you up on it.
Do you have the same issue if you follow the OP’s steps to reproduce it?
• Yes
Provide extra information to complete the original description of the issue:
• I am seeing this issue with the SR22, as specified by the OP. The flaps simply bypass the 50% position and are either full down or full up. I can, however, use a mouse to put them in the 50% position, so it seems the issue is with the “Decrease Flaps” and “Increase Flaps” control bindings.
If relevant, provide additional screenshots/video:
•
I’m not sure if I should create a new bug report or post here, but I’ll post here anyway.
Do you have the same issue if you follow the OP’s steps to reproduce it?
My VPC CM3 throttle has a flaps axis, and when this is bound to Flaps Axis, I can only set flaps to fully extended or fully retracted, no in between. This happens with any aircraft.
I also have this issue with flaps. Can anyone confirm the following issues with the SR22 as well:
The parking brake cannot be toggled with the default Ctrl-Space assignment, nor when this is assigned to a controller.
The mixture control is hard to control by clicking and dragging with the mouse, it is jerky and appears to want to move in a different direction than you are pulling it. This is when the mixture is unmapped to any axis. When mapped, the controller will move the mixture smoothly as intended.
I’m seeing the same issue with the Flaps in the SR-22T. I can set the parking brake using the Toggle Parking Brake keybind, but I cannot release it. I have to click on the parking brake handle in the cockpit.
Do you have the same issue if you follow the OP’s steps to reproduce it?
• yes
Provide extra information to complete the original description of the issue:
• Same issue when mapping increase/decrease flaps on velocity one flight stick. Also when setting parking brake toggle on/off the parking break briefly disengages then immediately re-engages.
If relevant, provide additional screenshots/video:
•
Do you have the same issue if you follow the OP’s steps to reproduce it?
• Yes, same issue in the Cirrus Sr22 with a Saitek Pro Throttle Quadrant
Provide extra information to complete the original description of the issue:
• Flaps are not incrementing correctly. Park Brake toggle isn’t working - it enables the Park Brake immediately.
If relevant, provide additional screenshots/video:
•
We have created an internal ticket to see if our team already has this logged, and if not they will attempt to reproduce the issue and create a new bug report. This item is now marked as feedback-logged. If there is an existing bug report or one is created, we will move this thread to bug-logged
SIM INFORMATION
For anyone who wants to contribute on this issue, Click on the button below to use this template: