The Cabin lights and panel lights only work correctly if you use a mouse over the knob.
The assignable keys for these lights don’t work. When you assign a key to the cabin light it moves the dial one tick as if it’s setup as an on off switch in the code. We need this to be changed to a dial or knob in the code for the key command. I also tested this with Simconnect commands and it does the same thing. However the panel light just does not work at all with a key command. Also tested with Simconnect. The strange thing is if you turn the lights all the way on with the mouse. Then turn them off it will actually turn the knob to the off position. But never on.
You need that fine tune control because full on is to bright for both lights. So it would be nice to have assignable keys to increase and decrease those light and have them work correctly.
I have already put in a Zen desk ticket but all of my requests over the years have been ignored.