ISSUE DESCRIPTION
Description of the issue: When entering a Direct To fix in the FMC with an INTC Course (used when being vectored to the final apprach course) the computer draws the course correctly on the MFD, however the guidance provided by the HSI and used by the flight director/ autopilot is faulty and does not allow the course to be intercepted.
FREQUENCY OF ISSUE
How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
-
Enter an approach procedure in the fmc and ensure NAV souce is FMS1
-
While off the approach course, go to the DIR page, select a fix, enter the final approach course under the INTC CRS in the bottom right of the FMC, then EXEC.
-
Notice HSI guidance is incorrect.
-
SEE VIDEO BELOW (HSI course should be 275 and needle deflected to the right)
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are you using, if relevant:
[PC Only] Are you using Developer Mode or have you made any changes to it? NO
[PC, MSFS 2020 Only] Are you using DX11 or DX12? N/A
[PC Only] What GPU (Graphics Card) do you use? N/A
[PC Only] What other relevant PC specs can you share? N/A
MEDIA
Please add a screenshot or video of the issue occurring.