If it helps, when I unzip the file from .to, I have the DA62X folder, and then (in various formats) da62bindings,the AFM, Austro Engine E4p OM, Checklists, DA62X Familarisation, and the Readme.
My elevator trim “binding” no longer work with the DA62 (latest mod). Same trim wheel works with other planes and I can manually change the trim on the DA62 via mouse, but the bindings do not work.
nothing has been done to the elevator trim
MrTommy, a couple issues with version 1.0:
- VOTER switches don’t cause the ECUs to show as failed anymore.
- YAW DAMPER. I cannot toggle it using the pilot’s left rudder pedal; I think that’s the correct hidden location but not positive.
- Is the correct behaviour, i had it wring all this time
- Custom yaw damper was removed because of all the problems mentioned above
Please, what tool is used to display in the “blue box” in your post?
Mr. Tommy, Great work.
I have a diy cockpit with Alpha, Beta and buttons pad. Use FSUIPC7 for switches and buttons.
The following events are displayed with the Battery switch for example:
Master Battery On
331937 *** EVENT: Cntrl= 66241 (0x000102c1), Param= 1 (0x00000001) TOGGLE_MASTER_BATTERY
332031 *** EVENT: Cntrl= 67073 (0x00010601), Param1= 2 (0x00000002), Param2= 1 (0x00000001)ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE
332031 *** EVENT: Cntrl= 67073 (0x00010601), Param1= 3 (0x00000003), Param2= 1 (0x00000001) ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE
332047 *** EVENT: Cntrl= 67073 (0x00010601), Param1= 15 (0x0000000f), Param2= 2 (0x00000002) ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE
Master Battery Off
452562 *** EVENT: Cntrl= 66241 (0x000102c1), Param= 1 (0x00000001) TOGGLE_MASTER_BATTERY
452734 *** EVENT: Cntrl= 67073 (0x00010601), Param1= 2 (0x00000002), Param2= 1 (0x00000001) ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE
452734 *** EVENT: Cntrl= 67073 (0x00010601), Param1= 3 (0x00000003), Param2= 1 (0x00000001) ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE
452734 *** EVENT: Cntrl= 67073 (0x00010601), Param1= 15 (0x0000000f), Param2= 2 (0x00000002) ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE
The question is, does the toggle master battery event trigger the bus to bus connections in the DA62 logic, or do I have to set the bus to bus toggles in the switch handling logic?
Mr Tommy,
I’m having difficulty turning on/off the Avionics Switch with Event coding, specifically
4 (>K:3:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE). Can you please share specifically the code you use ti turn the switch on/off?
That event needs 2 bus id’s not just the one you provided and from memory it starts with K:2 not K:3.
why are you trying to toggle the busses?
leave them.
I am using the actual pilot’s guide and checklist. I’m an ex-Navy aviator and like the realism.
But using FSUIPC7, I found the event.
Thanks
MrTommyMxr, do you have any plans to put the DA62 checklists on the MFD in your amazing mod? Se
I’ve been researching the DA62 Mod for some time. Bravo to your development, especially for a free addon.
Using FSUIPC7 (especially with the new input events functions) one can find significant details).
For those of us that have a home built cockpit and/or use Honycomb’s Alpha and Bravo, a couple of questions, please:
-
Is there any significance to a parameter above nil or zero that shows on a toggle event?
-
On toggles events that have options, such as the Battery, why do developers not use the on and off or set functions. The Alpha’s battery switch, for example, is on and off. Difficult to sync in a cold start to shutdown if the switch is in the wrong position.
-
According to the FSUIPC7 traces, the Avionics switch uses only a bus to bus toggle. This switch isn’t on the startup checklist. Would you provide a little insight or point to documentation.
Thanks for your effort.
Is this mod working with the su15 beta?
Yes.
I am sorry if this has been asked before, but I have been searching for some time and cannot find it. The de-icing fluid is low in my aircraft and I cannot find where to fill it up. The W&B screen does not have a line where I can enter the amount of fluid needed. Neither in flight or on the ground. What am I missing?
Last line at W&B page called DE-ICE Fluid.
Thanks, found it.