DC-3 classic doesn't show glideslope on ILS approaches

Are you using Developer Mode or made changes in it?

No

Have you disabled/removed all your mods and addons?

Yes

Brief description of the issue:

The CDI in the DC-3 classic version doesn’t show a glideslope on ILS approaches. Only lateral guidance.
Workaround: Assign a key and press “TOGGLE TACAN DRIVES GPS”
My guess is that the classic version expects a “GPS” glideslope source but doesn’t have one.

Provide Screenshot(s)/video(s) of the issue encountered:



Detailed steps to reproduce the issue encountered:

Place DC-3 classic on runway with ILS, dial ILS frequency, move off center of runway, observe only lateral needle moving. Screenshot used KMCO RWY 36R freq 110.7

Build Version # when you first started experiencing this issue:

1.29.30.0


:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

same fault on the classic version, same workaround works.

Also: there is feedback from Imenes who says that the correction wil be included in a future update of the Duckworks mod for the Sperry pilot version…

Now fixed with the latest Duckworks mod (0.3.5).

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

1 Like

Do you have the same issue if you follow the OP’s steps to reproduce it?

Yes

Provide extra information to complete the original description of the issue:

no additional information but I am encountering the same issue

If relevant, provide additional screenshots/video:

Closed as fixed in Sim Update 13: Release Notes - Sim Update 13 [1.34.16.0] Available Now