DC-3 Flaps At 5 Degrees When Rectracted

[FieldGunner]

Thank you using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.

Are you using Developer Mode or made changes in it?

No

Have you disabled/removed all your mods and addons?

Yes

Brief description of the issue:

When the flaps are fully retracted as shown in the VC as well as they HUD they are still reading 5 degrees. Tried keyboard commands as well as mapped lever on throttle quadrant to see if they can be retracted to the point of reading 0 degrees to no avail.

Provide Screenshot(s)/video(s) of the issue encountered:

Detailed steps to reproduce the issue encountered:

Load aircraft with HUD and go to external view. Observe 5 degrees flaps shown even though the scale says they’re up. Extrend flaps fully to 45 degrees, retract flaps fully and note they do not go past 5 degrees.

PC specs and/or peripheral set up if relevant:

Build Version # when you first started experiencing this issue:

From the initial 40th Anniversary release. No change with .30 update.

---

For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

[WiredHornet7888]

Do you have the same issue if you follow the OP’s steps to reproduce it?

yes

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

[FieldGunner]

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

I’ve tracked down the problem to the flap level definitions in the cockpit.cfg file. If the section is updated as follows the flap degrees in the HUD displays match the levels set by the flaps lever and the keyboard increment/decrement shortcuts:

[FLAPS_LEVELS]
flaps_level_1 =0
flaps_level_2 =5
flaps_level_3 =10
flaps_level_4 =15
flaps_level_5 =20
flaps_level_6 =25
flaps_level_7 =30
flaps_level_8 =35
flaps_level_9 =40
flaps_level_10 =45

If relevant, provide additional screenshots/video: