Hi guys, I jist wanted to ask if anyone knows a fix for the Engine on the DG1001E not starting?
I fly gliders in RL and if I spawn at my home airfield, the winch won’t lauch me as high as it does in RL. Anyways, that’s not the point.
If I want to start the engine to help me climb (I press the red cover, then the switch under it, then I turn the FCS Power on and nothing happenes except for a warning sound and a text that tells me “check the fmc power”… Also what I’ve read is that Asobo suggests to turn on the switch under the red cover, then turn on the FMC power, then turn OFF the switch under the Red Cover and it should supposedly work…well it doesn’t for me.
I tried everything, also stuff that I know from Gliders in Real life but it just doesn’T have any effect…
anybody know a solution?

Topic Moved to Community Support
The Bug Reporting Category is for creating reproducible bugs (without creating duplicates) by using the provided template 
Master switch is on.
Turn on the FCS. The display should light up.
Turn on the motor power switch.
Advance the throttle and the propeller should start spinning. The throttle is a rotary knob on the FCS. I have a throttle axis programmed.
This procedure works for me.
UPDATE:
After I thought about it, I remembered that although I do fly the DG-1001E, I haven’t had to used its Front Electric Sustainer. The above procedure is correct and verified for the Got Friends Discus 2c FES.
I just tested the sustainer on the DG-1001E. I can verify the OP’s experience that it’s not functioning correctly. Although you can get the sustainer to work, the FES FCU display will show an error message while the motor is running.
To get the motor on the DG to run, you have to cycle the motor power switch a couple of times after turning on the FCS. Then advance the throttle and the motor runs, but the FCS’s screen is blank with the error message.
Today I did some more testing, I usually fly in VR, so decided to see if the DG FCS would act differently in 2D.
Turned on the FCU before launch. After tow release switched on the motor power and throttled up. System functioned correctly.
Powered system down, turned FCU off. Turned FCU back on, turned motor power on, throttled up and system functioned correctly.
Since this result was different than my experience yesterday in VR, I repeated the flight, this time in VR. System functioned correctly both at initial startup and after shutdown and restart.
No difference between 2D and VR.
Now wondering if having the FCU turned on before launch made the difference today from yesterday, launched in VR with FCU off. After tow release I turned on the FCU, switched motor power on, throttled up and….. system functioned correctly.
I’m stumped. Yesterday the sustainer system glitched, today it’s working as intended. Apologies to the OP, I have nothing to offer regarding his issue. Gremlins, sun spots, loose wire in the ECU, could be anything.
Thank you for the replies. I havent tried turning it on before takeoff.
Still, its a bit confusing. Also since it is the only double seater as of now.
I’ll try everything again when i am back home