Dornier DO 31 Unflyable VTOL, STOVL


ISSUE DESCRIPTION

Description of the issue:
Airplane Flight model in FS2024 is not working. The flight mechanics compared to FS2020 are completly distorted, the plane cannot fly correctly. VTOL is totally not working and the yoke feels to light, it feels like if flying a fighter. I used to fly the plane constantly in FS2020 as per Inibuilds instruction of using a third axis for the copiloit assit for VTOL and STOVL, in FS2024 this is completly distorded, the plane cant VTOL, it just lifts with very fast forward momentum. Also the center of gravity seems to way off as the plane pitchess down constantly and without recovery.

If applicable, which aircraft is experiencing this issue:
Dornier-DO 31

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
Yes

FREQUENCY OF ISSUE

How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Everytime

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

  1. Free Flight
  2. Choose Dornier DO 31
  3. Choose any airport.

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant:
TCAS yoke and TCAS power management. Axis 3 is enabled as per inibuilds instructions for axis 3.

[PC Only] Are you using Developer Mode or have you made any changes to it?
No

[PC, MSFS 2020 Only] Are you using DX11 or DX12?
DX 12

[PC Only] What GPU (Graphics Card) do you use?
NVIDIA 3080ti

[PC Only] What other relevant PC specs can you share?
Intel I9, 64GB RAM

MEDIA

Please add a screenshot or video of the issue occurring.

[END OF FIRST USER REPORT]


:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
•

ISSUE DESCRIPTION

**
Manuel Rivas Bastante**Today, 1:48 PM

I would like to report a serious flight model issue with the Dornier Do 31 in Microsoft Flight Simulator 2024.

The VTOL/STOVL flight characteristics of the aircraft appear to be incorrect. It is extremely difficult, and in practice almost impossible, to perform a normal vertical takeoff or stable hover.

When attempting to lift off vertically, the aircraft develops a strong and seemingly uncontrolled forward acceleration instead of maintaining a stationary hover. It also tends to pitch down continuously, making it impossible to control the aircraft properly in VTOL mode.

I have tested the aircraft without any Community Folder modifications or third-party addons affecting the aircraft. I have also checked the relevant control axes and followed the recommended control setup.

This is particularly noticeable because I previously flew the Dornier Do 31 successfully in Microsoft Flight Simulator 2020. Its VTOL behaviour there was fundamentally different and allowed normal hovering and vertical takeoff.

The problem therefore appears to be related to the MSFS 2024 flight model or VTOL implementation of the aircraft rather than to my controls or configuration.

The Dornier Do 31 is a VTOL aircraft, so this issue affects one of its most important and distinctive functions. At present, the aircraft is effectively unusable for the type of operations for which it was designed.

I have recently purchased the Microsoft Flight Simulator 2024 Aviator Edition, which includes the Dornier Do 31, and I would appreciate it if this issue could be investigated and corrected.

FREQUENCY OF ISSUE

Every time on sim load

REPRODUCTION STEPS

  1. Start Microsoft Flight Simulator 2024 and select Free Flight.
  2. Select the Dornier Do 31.
  3. Select any airport and start the flight.
  4. Configure the aircraft for VTOL operation using the vertical/third throttle axis as described in the iniBuilds documentation.
  5. Activate the VTOL system and attempt a vertical takeoff.
  6. Increase the vertical engine thrust progressively in order to establish a stationary hover.
  7. Instead of remaining approximately stationary, the aircraft develops a strong forward movement/acceleration and cannot maintain a stable hover.
  8. The aircraft also tends to pitch down continuously, making controlled vertical flight extremely difficult or impossible.
  9. Repeat the test with the Community folder empty/disabled. The issue still occurs.

YOUR SETTINGS

What peripherals are you using, if relevant:

TCA Yoke Boeing Edition and TCA Boeing Throttle Quadrant. The Dornier Do 31 vertical/VTOL throttle axis is assigned to the appropriate third throttle axis as required for the aircraft. The Throttle 1 & 2 axis are assigned to the same lever.

[PC Only] Are you using Developer Mode or have you made any changes to it?
No.

[PC, MSFS 2020 Only] Are you using DX11 or DX12?
Not applicable. This report concerns MSFS 2024.

[PC Only] What GPU (Graphics Card) do you use?
NVIDIA GeForce RTX 4070 Ti.

[PC Only] What other relevant PC specs can you share?
AMD Ryzen 9 7900X
64 GB RAM
NVMe SSD
Windows 11