ISSUE DESCRIPTION
The Seastar doesn’t lift off when taking off from a water surface; acceleration stops around 80-90 kts and rotating has no effect.
FREQUENCY OF ISSUE
Every water take off.
REPRODUCTION STEPs
Just take off from water; either by spawning or prior landing.
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are you using, if relevant:
[PC Only] Are you using Developer Mode or have you made any changes to it? Yes, but no changes.
MEDIA
Please add a screenshot or video of the issue occurring.
I’m seeing the same thing. It takes off from a land airport just fine (i.e. continues to accelerate, and rotates/lifts off as expected). But on the water, it stops accelerating ~80kts. The elevators are visually working correctly, but have no effect on the plane on the water. Flaps appear to be operating normally. Gear is not down while in the water.
The only way I got it to take off on the water, was hit a fairly shallow beach and “launch” into the air.
Pretty sure that’s not mentioned in the POH!
Regards
Can replicate.
Edit: was able to take off using full flaps but I don’t think it is the normal configuration to achieve it.
Confirmed. Cannot perform water takeoff.
Same problem here. I couldn’t get it past 70 kts.
Can confirm. Samw problem here
What about logging and maybe even fixing this glaring bug. Come on, a seaplane that cannot take off from water.
It can with full flaps and pumping the stick back and forth to break out of the water. Needs fixing, no question.
I did 5 trials right now at KBIC : 1st was bad because it stalled just after being airborne. The other 4 take-off were just fine. No problems. Flap 20% and at speed 78-80 it went up.
So, just click Restart, and normal takeoff?
No ,after the stall reloaded KBIC on worldmap and started again..
Than on the same flight ,after the take-off I water-landed and waited to reach zero knts speed then pushed the thrust again for take-off …4 times like this. I pulled the stick a little bit just at 75- 78 knts.
I took out all the passengers and cut fuel down to 30%. With full flaps it lifts off without much effort. It’s too heavy for 20% flaps.
I did a very quick trials without checking fuel and passengers load. Just the default loadings. No problems to take-off with 20% flaps. If you do a flight plan from A to B and load passengers and fuel for the flight it may certainly change…
Sorry, are you saying you loaded a flight plan? Or no flight plan, default load, and no takeoff issue?
No flight plan , default load and no take-off issues.
Is that Live Weather? I’m using Clear Skies. Maybe more headwind is required or choppy water to kick it up.
Ok , I’ am on Live Weather with some wawes.You may try it right now on the same place.
Bingo! Choppy water, and more headwind, and hard right rudder to keep from stalling back down did the trick with default load and 20% flaps.
Great. I tried your settings : Clear Sky…faced your same problems . Difficulty to reach 80 knots speed and needed full flaps to take-off. Weird enough