I’m having a problem with the Draco X airplane the throttle (N1) Goes to 100% and remains there. I turned off all of my peripherals and just use the mouse to make sure I didn’t have a conflict and while I can move the throttle it stays at 100%.
Has anybody else experienced this and fixed it somehow?
Just updating my troubleshooting in case someone else encounters this. I turned off all peripherals and loaded up the Pilatus, Caravan, King Air and used the mouse for throttle. They worked. Loaded up Draco, it worked. I then tried turning on my Honeycomb Bravo Throttle Quadrant and I moved the throttle lever and it immediately went to 100% throttle and stuck there. I turned off the Bravo and the throttle was still unresponsive using my mouse.
I reloaded and tried using my Thrustmaster HOTAS and that worked.
My next steps to try are rebinding the bravo throttle access to another axis to see if it’s not a hardware problem with my bravo. I doubt it is because it works perfectly with GA piston aircraft. I also want to see if the bravo exhibits the same problems with other turbine aircraft.
Thank you for posting this. Honeycomb Bravo here doing the same thing. The throttle inside the plane seems to have no input and the hardware throttle same thing. The plane just thinks it’s at 100% ALL the time. This is the only plane so far I’ve found this issue with.
Ok I figured it out through process of elimination. If the auto pilot selector knob is on IAS, that is what causes it.