EDDW (Bremen): no distance information from ILS 27 and VOR BND

ISSUE DESCRIPTION

Description of the issue:
EDDW’s ILS for RWY 27 (IBRW 110.90) doesn’t deliver distance information.

If applicable, which aircraft is experiencing this issue:
Tested with iniBuilds Airbus A320neo and Cessna 172 G1000

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
no - only SimBriefEFBApp installed, this shouldn’t impact the described issue

FREQUENCY OF ISSUE

IBRW 110.90

How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
First observed with A320neo, then also reproduced with Cessna 172 G1000.

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

  1. plan a flight with an ILS 27 Z approach to EDDW
  2. set ILS frequency
  3. fly the approach
  4. distance information is missing, even from a distance of ~1.5 NM

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant:
not relevant

[PC Only] Are you using Developer Mode or have you made any changes to it?
no

[PC, MSFS 2020 Only] Are you using DX11 or DX12?
DX12

[PC Only] What GPU (Graphics Card) do you use?
RTX 4090

[PC Only] What other relevant PC specs can you share?
not relevant

MEDIA

[Please add a screenshot or video of the issue occurring.]
A320neo approach: https://youtu.be/ocdWbuer1_8?si=ilAKMwrL9NaMBsl2&t=263

[END OF FIRST USER REPORT]


:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

You don’t get distance information from IBRW. You get it from BMN and BND.

1 Like

BND obviously doesn’t work as well, see https://youtu.be/JYLkdox4Vug

That’s strange… in the A320neo (iniBuilds) both VOR are delivering the distance:

Press the softkey below DME then press the softkey below Back then press the softkey below ADF/DME then change the DME to NAV2. Also this particular station with the ident of BND isn’t a VOR (as you titled your video) or even a VOR/DME. It’s just a DME station.

1 Like

Thanks for clarification! Now I can see the Distance to the DME-Station BND.

Moved to User Support Hub since a solution has been marked.

1 Like