ISSUE DESCRIPTION
Description of the issue: When flying the updated ATR 42/72, the flight model for both of them seems to be wrong. I have tried multiple traffic circuits and landings, and even though the aircraft is configured with full flaps and landing gear out + Flight Idle, it still struggels to go below 120 to 130 KIAS. I am not an ATR pilot, but for me a prop aircraft should not struggle to get to Vapp(110kts ca.) in landing config and idle with 800 to 900 fpm descent before landing.
FREQUENCY OF ISSUE
How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Every time.
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
-
Configure for landing in the ATR 42/72, and initiate a normal descent rate before landing (800 to 900 fpm).
-
Notice how the aircraft drops quickly from 200 to 140/130 KIAS, but struggels to go below this regardless of config and min throttle.
-
Landing will be too fast, and float is often experienced.
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are you using, if relevant:
[PC Only] Are you using Developer Mode or have you made any changes to it? No
MEDIA
Please add a screenshot or video of the issue occurring.
On purpose I came in high on the final, went flaps full and idle. In my opinion you should be able to recover from this position and save the landing. However as the video shows, i cannot get below 140kias and still end up with 4 whites.