FlightFX Hondajet - XXXX in PFD and Standby Attitude Indicator

Discussion Hub Aircraft
1

Are you on Xbox, Steam or Microsoft Store version?

Microsoft Store Version
Are you using Developer Mode or made changes in it?
No
Brief description of the issue:
X’d out values in speed tape, altitude indicator, standby attitude indicator and PFD is not functional
Provide Screenshot(s)/video(s) of the issue encountered:

image
image722×695 53.7 KB

Detailed steps to reproduce the issue encountered:

Select the aircraft and route. Start the flight. HIt the battery switch and you see the issue immediately. Completing initialization does nothing.
PC specs and/or peripheral set up if relevant:
Case: Corsair Carbide 275R
Memory: Corsair Vengeance LPX 32GB (2x16GB) DDR4 3000Mhz
Mobo: Asus TUF Z390m
Power Supply: Thermaltake BXI 750W
CPU: i5-9600K @ 4.8Ghz
Cooler: Coolermaster Hyper-212 Evo
GPU: Gigabyte GeForce RTX™ 3080 Ti EAGLE 12G
SSD: Samsung 860 Evo 1TB
Build Version # when you first started experiencing this issue:

:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue by following the OP’s repro steps?

Provide extra information to complete the original description of the issue:

If relevant, provide additonal screenshots/video:

2

Hi @FlyIslandGuy, and a warm welcome back to the forums. Hate to see you having this issue but trust there are some here that can help out.

Now that you are back, please check out the Code of Conduct and Terms of Service to reacquaint yourself with the rules of the road in the forums. There is also a Forum Guide where you can review the features available to you here.

Again, welcome back, and good luck with your issue.

3

Do you have the same issue by following the OP’s repro steps?

No
Provide extra information to complete the original description of the issue:
This happened to me on another Aircraft. The problem was the GN750 addon was active. Use addon linker and disable the GN750 or remove it from your community folder then try again. Worked for me…
If relevant, provide additonal screenshots/video:

4

Thanks…yeah that was the issue. I appreciate it. I have another issue with my external power not activating but that’s small potatoes so not worrying making an issue with that

1 Like
5

Engage parking brake for GPU

6

it’s fine to use the GTN750, just make sure you’re running the latest version.