FS2024 Third Party Aircraft Compatibility List (Unofficial)

Discussion Hub Aircraft
,
22

RJ100 is confirmed forward compatible by JustFlight. There’s some minor glitches with the windshield but they’re patching.

2 Likes
23

Does the installer work without MSFS 2020 installed? That’s a problem I’ve found with all Just Flight addons so far, they can’t install without the FS2020 UserOpt.cfg file present.

24

The Bonanza Improvement project works but I don’t think the WT GPS works the same as the standard Bonanza. I didn’t see all the detail , like fix’s in the Improvement project. I might have done something wrong but it didn’t appear to be the same.

25

Appreciate the HU. Im a huge fan of the RJ by JF. That means its on my Xmas list.

1 Like
26

So, do I just copy the Files from the FS 2020 comunity folder?

27

I have to dispute - or at least qualify - others’ reports regarding the FlyingIron P-38L. I can report it does work, sort of, but with caveats. I can’t seem to do go a cold & dark start - seems to be something not working correctly in the starter/energizer switches for the engines. CTRL-E will start them up however. After that, all the gauges and sounds seem to work, though flight dynamics seem off. There’s a weird fishtailing oscillation in straight and level flight that I wasn’t able to trim out, and something I don’t remember experiencing in 2020, though I ran out of time this evening to load up the older sim to compare.

1 Like
28

I have the C414AW Chancellor for MSFS2020 but cant even find it in MSFS2024 yet

29

I will double check how it works. Do you have it through the Marketplace? I think otherwise you can copy the files to the MSFS2024 Community folder.

30

My FSW C414AW is thru marketplace. I cant even get it to show.

31
  • Tested and confirmed the Drifter Ultralight (SimMarket install) works well
  • Tested the CAC Winjeel by Ant’s Airplanes and couldn’t get it to take off, but I’m 90% sure it’s user error. It’s a complex engine modeling and I remember having the same issue in FS2020 at times. Not adding to the list just yet.
  • Tested and confirmed the ERCO Ercoupe 415 by BRsimDesign is working well (no pilot model is visible, only issue I’ve found so far.)
  • Tested and confirmed the Nardi FN-333 Riviera by MND is working.
  • Tested and confirmed the Flyboy Rans S-6 Coyote is working.
  • Tested the Bellanca Super Viking by Lionheart and didn’t encounter any major issues.
1 Like
32

Fenix just released their MSFS 2024 version of A320 series on the installer. Haven’t tried it yet though.

2 Likes
33

Thanks for the update! I added it. Do you know if the A319/321 expansions are covered by that update as well, or just the base 320?

34

All three aircraft are covered.

1 Like
35

SimWorks Studios RV-14: loads up but the enigne doesn’t start. It doesn’t even make a peep when you hit the starter. Not compatible

SimWorks Studios RV-10. Seems to work for the most part. Minor issues: no pilot visible in the external view and the Garmin units don’t see any Nearest airports/intersections/NDBs/VORs (might be a general FS2024 issue, haven’t checked yet). And the LVL mode of the autopilot doesn’t work. Nav lights don’t work. (Mostly) Compatible

Taog’s UH-1 / 205 Huey: works but with a heavy performance penalty. Compatible, but only usable on high end PCs.

CAS Piper J3 Cub. Loads up, the tablet works but no engine start possible. Not compatible. UPDATE: Jacobes16 just posted the information that some of the liveries with the registration on the tail might work for the time being, while the others have WASM / panel.cfg issues. I will try it and report back. UPDATE 2: no luck on my end, not even with the recommended Tailreg liveries. Perhaps someone else has more luck but I have to reconfirm: Not compatible

36
  • Added the Cockspur C162 as it does work, but its screens are extremely dim which may make it feel unusable to some.
37

Also want to add that it was a free upgrade.

1 Like
38

Though they mention it wasn’t simply forward compatibility, they also mention they aren’t supporting a lot of the native FS2024 features yet. I’ll wait until they add all of that to say it was a free upgrade, in case that causes them to add a fee (though I don’t expect it to.)

40

TFDi MD-11 works but with some issues. The biggest I found were the dim screens. May be others as I haven’t flown it long enough yet but hearing from others it seems okay.

Leonardo MD-82 loads but I think has activation issues - can’t seem to get the external app to work, and certain functions don’t seem to respond.

1 Like
41
  • Added the COWS DA42 and all of the CowanSim helicopters as they are listed as FS2024 Compatible on Orbx.
42

My experience so far:

Works without noticeable issues

  • S&H Software ATR 42/72-600
  • FSReborn M500

Works with minor issues

  • SWS Kodiak: Payload/Passengers do not appear (only visually)
  • Black Square Turbine Duke: A few gauges need a rework but remaining usable.
  • Black Square Piston Duke: See Turbine variant.
  • Black Square TBM850: Same as Duke.
  • A2A Comanche: Minor bugs, developer is already addressing them.
  • Airfoillabs Bristell B23: MFD brightness is too dark, possibly an issue on my side.

Does not work/does not appear

  • SWS Pilatus PC 12: Gauges and Instruments do not work properly. Update will be send out by SWS free of charge according to Devs.

Edit: Kodiak has no payload visible
Edit 2: TBM 850 Sound fix (Link to JF Forum)
Edit 3: Added SWS Pilatus PC-12

Note to Dukes: Piston/Turbine located in the variants.

1 Like