Thank you using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.
Are you using Developer Mode or made changes in it?
No
Which aircraft are you using that experiences this issue?
Cub Crafter XCub
Brief description of the issue:
Fuel PSI stays in the red
Provide Screenshot(s)/video(s) of the issue encountered:
Detailed steps to reproduce the issue encountered:
PC specs and peripheral set up:
Are you using DX11 or DX12?
Are you using DLSS?
For anyone who wants to contribute to this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
Provide extra information to complete the original description of the issue:
Are you using DX11 or DX12?
Are you using DLSS?
If relevant, provide additional screenshots/video:
Do you have the same issue if you follow the OP’s steps to reproduce it?
Yes
Provide extra information to complete the original description of the issue:
Conflicting values between two pages
Are you using DX11 or DX12?
DX11
Are you using DLSS?
No
If relevant, provide additional screenshots/video:
Do you have the same issue if you follow the OP’s steps to reproduce it?
Yes
Provide extra information to complete the original description of the issue:
The G3X Fuel Pressure (PSI) gauge on both XCub & NXCub is showing an incorrect value.
Expected behavior: Fuel pressure would match between the two screenshots posted by OP.
Actual behavior: Fuel pressure setting is different between screenshots.
The fuel pressure gauge is working - pulling the mixture back to zero to cut the engine will drop the fuel pressure PSI to zero, as expected.
The fuel pressure gauge in the G3X in the JMB VL-3 matches between the same two screens & is operational. Increasing the throttle will increase fuel pressure, cutting the engine drops it to zero, as expected.
Are you using DX11 or DX12?
DX12
Are you using DLSS?
No (Intel Arc 770, TAA)
If relevant, provide additional screenshots/video:
Note the two different values in these two screenshots - 8.0 vs 28.0. Because the pressure drops to zero when one cuts the throttle, this suggests that there may be a “typo” in the PSI calculation code for the fuel gauge in the first shot that is causing it to be ~ 29% of it’s true value (in the secnd screenshot), so causing it to show in the red area.
The mis-match is still visible in V1.37.4.0:
Fuel PSI at 8:
Fuel PSI at 28:
The first pic shows the fix listed in the release notes:
“Fixed the color of engine gauge text labels when the gauge value is within a red scale range.”
Do you have the same issue if you follow the OP’s steps to reproduce it?
Yes.
Provide extra information to complete the original description of the issue:
In the NXCub, fuel PSI on the left side is stuck at 8.0, while on the engine page it’s 28.0. Haven’t tested other G3X aircraft yet but I assume it’s the same across the board.
Are you using DX11 or DX12?
N/A (Xbox Series X)
Are you using DLSS?
N/A (Xbox Series X)
If relevant, provide additional screenshots/video:
The fuel gauge issue reported above is fixed in build v1.37.5.0, as per release notes:
NXCub
XCub
Thanks Devs! 
2 Likes
