G1000 PFD not working in Bonanza

meh1951 · October 30, 2023, 8:13pm

Thank you using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.

Are you using Developer Mode or made changes in it?

no

Which aircraft are you using that experiences this issue?

Bonanza

Brief description of the issue:

Speed never changes. Can’t set heading, altitude etc

Provide Screenshot(s)/video(s) of the issue encountered:

Detailed steps to reproduce the issue encountered:

How in the default Bonanza

PC specs and peripheral set up:

Z390-P BiosVer 30043
Processor Intel(R) Core™ i7-9700K CPU @ 3.60GHz 3.60 GHz
Installed RAM 32768.0 GB DDR4 2666MHz

Processor Intel(R) Core™ i7-9700K CPU @ 3.60GHz 3.60 GHz
Installed RAM 32.0 GB
System type 64-bit operating system, x64-based processor
SanDisk SSD G5

Edition Windows 11 Pro
Version 22H2
Installed on ‎8/07/‎2023
OS build 22621.2262
Experience Windows Feature Experience Pack 1000.22634.1000.0

NVIDIA GeForce RTX 4070ti with 12g memory
Driver 545.84
DisplayPort
G Sync Monitor: Dell 27 Gaming Monitor - S2721DGF
HP Reverb G2
Re-size bar - enabled

Honeycomb Alpha & Bravo
Thrustmaster TPR Pedals

Internet Speed
230.9 Mbps download
32.5 Mbps upload

Are you using DX11 or DX12?

DX11

Are you using DLSS?

yes

For anyone who wants to contribute to this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

Are you using DX11 or DX12?

Are you using DLSS?

If relevant, provide additional screenshots/video:

HamMan2118 · October 30, 2023, 8:25pm

Do you have the same issue if you follow the OP’s steps to reproduce it?

No

Provide extra information to complete the original description of the issue:

Takeoff and climb went normally and the PFD worked as intended.

Are you using DX11 or DX12?

DX11

Are you using DLSS?

No

If relevant, provide additional screenshots/video:

meh1951 · October 30, 2023, 9:37pm

reboot fixed it for me

Pieter2427 · October 30, 2023, 10:01pm

Do you have the same issue if you follow the OP’s steps to reproduce it?

Yes

Provide extra information to complete the original description of the issue:

For me, the offending mod is the Navigraph Avionics plugin G1000 v1.2.0

Are you using DX11 or DX12?

DX12

Are you using DLSS?

No

If relevant, provide additional screenshots/video:

image844×107 11.2 KB

SeedyL3205 · October 30, 2023, 10:03pm

Hi @Pieter2427,

For clarification, are you saying this issue is present when you have the Navigraph Avionics Plugin G1000 installed and running but it is not an issue if you remove/disable the mod?

Thanks,
MSFS Team

Pieter2427 · October 30, 2023, 10:10pm

I am indeed saying that. After reboot, the issue persists when the mod is enabled. When disabled, all is working again.

HamMan2118 · October 30, 2023, 10:13pm

I did test this issue with an empty community folder however when I did have Navigraph installed, I saw the issue

meh1951 · October 30, 2023, 10:25pm

My issue is back now with Navigraph installed.

Pieter2427 · October 30, 2023, 10:27pm

Yeah, can 100% reproduce with installing/removing the Avionics Plugin G1000. Including when having enabled 41 other addons.

meh1951 · October 30, 2023, 10:29pm

with Navigraph uninstalled I also have the red X’s

Pieter2427 · October 30, 2023, 10:46pm

Yes, but that’s proper simulation of (probably) your avionics bus being off.

MichiganBill222 · October 30, 2023, 11:38pm

Hi,

Loaded the latest beta today, fired up the Asobo Cessna Skyhawk, and noticed the following:

All buttons on the G1000 were inoperable. COM and NAV values blank. And a message in yellow that said “GPS LOI”

Deleting the folder “navigraph-avionics-g1000” In the Community folder fixed the problem.

Bill

CurrentFoil3744 · October 31, 2023, 2:55am

Same behavior here, exactly, with the Skyhawk and Navigraph.

SkySail4077 · October 31, 2023, 3:56am

Hello everyone! Apologies for the inconvenience.

We have identified the source of this issue to be (so far) undocumented changed requirements in the plugin support for the G1000. A new update has just been released which should adapt the plugin to work well with the beta!

Let us know if it works as expected!

Kind Regards,
Malte @ Navigraph

Toddimus831 · October 31, 2023, 4:10am

Ugh! No bueno.
Thanks for the quick fix!!!

meh1951 · October 31, 2023, 5:03am

Thanks for the quick fix.

Bishop398 · October 31, 2023, 5:29am

We’re tracking this issue on our end. There should not have been any changes that weren’t backwards compatible, so we’re checking on it to see why it is behaving the way it is. Thankfully, that’s why we do these betas.

We expect that we’ll be able to remove the issue causing compat breakage in a future beta build.

Szepy2235 · October 31, 2023, 8:45am

The fix works perfectly, thank you!

CurrentFoil3744 · October 31, 2023, 2:32pm

Yes, I can also confirm the problem is resolved! Thank you, Navigraph!

VHZFA · November 1, 2023, 8:07am

Do you have the same issue if you follow the OP’s steps to reproduce it?

Yes and in all G1000 aircraft, removed the WT mod encase and still is no fix

Provide extra information to complete the original description of the issue:

Are you using DX11 or DX12?

11

Are you using DLSS?

YES

If relevant, provide additional screenshots/video: