Hi, my Fs is running well, with high setting and all data set to “activated” but i noticed that when i’m flying there is not much data downloaded. i have 400mbps on my computer through wifi. my configuration is the following : R9 3900X 12C @4.3Ghz - AORUS ELITE X570 - 32GB 3200MHz - MSI GTX1080…

If you want to some good looking photogrammetry have a look at Venice. You can then turn it off to see what standard ai generated buildings look like when photogrammetry is not used. Note to get MSFS to fully disable/enable photogrammetry it is best to restart your flight after you turn it on or off…

At least you have the autogen buildings. I get flat aerial footage only.

Probably by design. They don’t want all the users to download (leech) hundreds of GB for manual cache.

I seriously doubt this is the case, as you CAN do it, it’s just a pain in the behind. I’ll have to compare my gta views to the above. I’m from London ON area

I’m having the same issues with those cities. Do you guys think that they’ll be improving those textures/cities that have photogrammetry?

Hi mate, maybe give this a try and change the Terrain LOD to 3.0 to see if it helps you [image] PSA: LOD Slider Can Be Increased Past 200 - Dramatically Improves Photogrammatery General Discussion Hi All, I was getting frustrated with the triangle spiked photogrammatery a…

4-5 external thread have been merged to this main thread, make sure you vote near the title, press vote.

Hi all , given the config file from above post , you can crank up the lod setting for objects and terrain , this mainly push lower resolutions textures far away from the view. BUT, you need a lot of memory to do that. i started with LodFactor 4/4 (4 terrain 4 objects) and starting from Milano ma…

Ground texture - Low resolution - Internet incorrect Bandwidth

Bug Reporting Hub Resolved

daveyshea August 25, 2020, 11:20am 176

Hi mate, maybe give this a try and change the Terrain LOD to 3.0 to see if it helps you