Flew Cabiri2 Helicopter last week with few problems. On Monday could not fly either Cabiri or Bell407; Cabiri would rise about 10’, then freeze, then would only fly backwards until crashing into something despite full forward cyclic. Bell 407 rises up without any collective input, then rolls over to right, does not respond to inputs. Using PC, Windows 10, MSFS Steam Version, Nvidia RTX 3080, Turtle Beach Flightstick.Anyone else having problems? Also did the bug recycle: FlightMode, Legend, Modern. Thanks for any help .
I’m not too sure what you mean by “did the bug recycle”, but if you are asking if any settings in your sim could have been changed by MSFS, the answer is yes, that can and does randomly happen.
Most times this only happens with an update.
I would check your settings and confirm.
All of those settings you mention will affect the aircraft.
From what I have seen, the settings that changes seem to occur the most in is the Piloting Assistance settings.
Mods that have been added to the sim, either in the Community Folder or purchased through the Marketplace can also cause this.
Ok thank you. Have not made any additions or subtractions addons in community folder since successfully flying the helicopters 5 days ago; also have changed pilot assist settings for the 2 helicopter assists from “off” to “on” and no change in helicopter control. Then changed back to off, no change. Not sure what has changed, will try removing every from community folder and adding back one at a time. Sincerely appreciate your time and effort to respond.
1 Like
Change flight model to Legacy, everything on 100%, save, change back to Modern, save. If no help, change to Legacy again, save, move everything (actually only Gyro part effects the problem) o 0%, save, move to 100%, save, change to Modern, save. If no help - as you are on a Steam, select Beta - this beta repairs helicopters.
Still broken even after trying this on SU11.