Game Platform (Exampe: Steam, Xbox, MS Store): Xbox Series S
ISSUE DESCRIPTION
Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
Description of the issue: The HOTAS one controls are all upside down. Up is down and down is up. The elevator trim up and elevator trim down does not seem to work after assigning the control input to it.
FREQUENCY OF ISSUE
How often does this occur for you? (Example: Just once, every time on sim load, intermittently) Every time
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue.
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are currently plugged in? Please name all of them as there could be a potential conflict. Hotas one, keyboard and mouse
[PC Only] Are you using Developer Mode or have you made any changes to it?
[PC, MSFS 2020 Only] Are you using DX11 or DX12?
[PC Only] What GPU (Graphics Card) do you use?
[PC Only] What other relevant PC specs can you share?
MEDIA
Please add a screenshot or video of the issue occurring.
[END OF FIRST USER REPORT]
For anyone who wants to contribute on this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
•
Provide extra information to complete the original description of the issue:
•
If relevant, provide additional screenshots/video:
•
Do you have the same issue if you follow the OP’s steps to reproduce it?
•
Provide extra information to complete the original description of the issue:
• I am using Logitec Extreme 3D Pro joystick. The correct model shows up in the controls setup but it shows a Saitek Extreme 3D is installed. Throttle works but no other inputs work. It does not llow any changes to be made. It is on a desktop installation
If relevant, provide additional screenshots/video:
•
Adding to this, for airplanes I was able to manually click the gear icon next to each axis that is reversed by default. I clicked “invert axis” and that fixed the throttle and stick so down is down and up is up.
That being said, for helicopters, every time I try to change an axis binding the game freezes.
Helicopter default controls are a mess and non-functional, can’t change them without the game freezing.
The hottest controller is so messed up I cannot use the game at all.
This is an oversight this is not acceptable. Rudder controls do not work properly when you twisting the stick nor the pedals I probably just use the stick.
Thrust actually causes the letter to move as well so when you go to take off get this pivots you’re playing and One Direction while you’re thrusting how could this even be allowed to pass testing? So the hotas are useless in the game I will have to completely redo them and completely reconfigure the stick the buttons and everything
By default my fire trigger was engaged and disengage the main autopilot and the one black button out of the three near the thrust I changed the reverse thrust that’s only two buns I should need to change however in this case they are completely wrong it’ll start just not work parking brake second button does not work landing gear button is not config no work Flats supposably is only thing actually working right in the air brakes on the lower thumb button on the thrust does not work either I will have to look up the old image of the hottest from 2024 and try to reconfigure and make a configuration file that works well
Microsoft Flight Sim 2024 Hotas Controller not working.
MSFS 2024 - Xbox Series S 1.1.7.0
Thrustmaster Hotas Controller inputs are not being registered in the sim at all. All buttons work on the xbox menu and have been tested but are all unresponsive in MSFS 2024.
SIM INFORMATION
For anyone who wants to contribute on this issue, Click on the button below to use this template:
