Hi @CrosscutTag1796
Based on your statement that your panel is like the one I showed you, I’ll try to cut through some fog here.
First, it sounds like you know how to set your VOR 1 correctly. If you can set the Freq/OBS for Nav1, then the process is exactly like how you set it, except you use the unit Below the unit you set up your Nav 1 info.
The top unit controls Nav 1 and the CDI unit for Nav 1 (directly to the left of the Nav 1 control unit).
The bottom unit controls the Nav 2 frequencies, and displays the information on the CDI 2 below the other CDI unit.
If your question is how to set the actual nav frequencies, then I’ll cover that too if you need it. Make sure you set the CDI button on each unit so “VLOC” (VOR/Localizer) shows on the CDI indicator.
More info to follow as needed.
P.S. As an alternative to help find your position, You can find the bearings to various VORs if you’re trying to locate your position by using the information on the top unit and calling up the “nearest VOR” page