@Wundermann and @CPTFisher2998
Just sharing,1.0.5 was just released to fix the LNAV issue.
@Wundermann and @CPTFisher2998
Just sharing,1.0.5 was just released to fix the LNAV issue.
If anyone is interested I did a mod for the lights on the A300, check it out!
https://flightsim.to/file/66466/inibuilds-a300-external-lighting-fix
After 40 min fly the mid fuel tank was empty and the plane crash in ground. I cant refuel it. This not always happenâŠ
Were all of the tank pumps on? The center tank should transfer fuel to the wing tanks over time. If it happens again, screenshots of the ECAM Fuel page would help.
yes all was on, The strange thing was that it fell steeply towards the ground, the autopilot switched off and I couldnât turn it on anymore, it wasnât possible to pull it up, the steering control no longer responded
This is a known bug, happens randomly (for me 3 times out of ~60 flights).
The developer is aware and trying to solve the problem.
I am yet to experience it in A300 but happened to me a few times in their A310. It was several months ago and if itâs still happening in A300 I doubt they will fix it anytime soon.
Try posting on the iniBuilds forum or discord. Thatâs really strange because you still have fuel in the wing tanks. I just did a 9 hour flight and never had fuel issues. Youâre on 1.0.5 right?
Youâre not pausing the sim and/or have an axis bound to Mixture, do you?
Itâs the Mixture binding that Iâm most suspicious of.
I delete him and all in AppData, now it works.
I noticed yesterday there is a huge dead zone on throttle axis. The virtual levers start moving when my physical throttle is at about 25%, according to EFB calibration tool. I donât use âreversers on axisâ, idle position is set to 0% and TOGA to 100%. Why there is no reaction from engines between idle and 25%?
I donât experience this in any other plane.
Happened to me with the 1.0.4 update. Recalibrate your throttle axis in the EFB, that fixed it for me even on a gamepad.
Does anyone fly this bird between major airports? Just did a flight between KLAX-KSFO (vanilla airports) and fps dropped to 20 on the ground! I have 13900k/4090/64GB RAM.
If you use 8K screen resolution I could believe that. To be serious. Take a look at at 4080 and 4090 related threads in this forum to optimize your settings.
It can happen easily if you are cpu limited. Without knowing what you are running or with what settings, it will be difficult to pin point. You can enable dev mode and turn on the fps counter to see which component is limiting your fps.
Since you are using a 4090, I highly doubt itâs a GPU or VRAM limit even if you are running ultra settings, if you are not running any absurd resolution like 8K.
Coming to the CPU, no matter whatever cpu you are running, you will get cpu limited unless you do targetted optimizations.
Some settings to check for CPU side optimization:
And most helpful thing here, if you donât face any issues with enabling DLSS FG, do that. Some people reported some issues, but i personally havenât faced those, so I turn it on when flying the A300 or A310 or any perf heavy airliner. You may see some artifacts if you pan the camera too fast, but usually itâs very usefull for airline flying in my opinion. Ofcourse you will have to deal with DX12 and a few annoyance it has like the ground texture tile missing issue that tends to happen from time to time. I have learned not to be bothered by that anymore.
Did you guys know that cockpit seats are adjustable? but, unfortunately only to the right and left!
Also, the animation is not that smooth and does not feel good.
Throttle wont go above 87% with efb re cal 1.05
If that is the bad part of the plane, then it is a really good plane
After latest update the A300 just falls from the sky! straight down and have no control, just out of the blueâŠwth??