ISSUE DESCRIPTION
Description of the issue:
When attempting to manually enter a flight plan on the F-PLN page of the MCDU it is impossible to correctly enter the first waypoint of the route. When you attempt to enter the first waypoint on the line beneath the origin airport, the origin and destination airports will duplicate after the original destination airport and then place your new waypoint after the second origin instance, so the sequence goes:
- Origin
- Destination
- Origin (again)
- First waypoint
- Destination (again)
If you attempt this same process with a departure procedure selected, the sequence will go:
- Origin
- SID
- Destination
- Origin (again)
- SID (again)
- First waypoint
- Destination (again)
Additionally, once these duplicates are added they are unable to be deleted, presumably because the FMGS is treating them as the origin/destination airports and not enroute waypoints.
I have examples of the first scenario without a SID in the screenshots below. This has been verified by other users and only seems to impact the iniBuilds A320neo as the same test performed on the iniBuilds A321LR and A330-200 do not result in this error.
If applicable, which aircraft is experiencing this issue:
iniBuilds A320neo
[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
Yes
FREQUENCY OF ISSUE
How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Every time
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
- Start a flight with the iniBuilds A320neo
- Turn on batteries and external power
- Set up the origin and destination airports on the INIT page of the MCDU (example: KJFK/KAFW)
- Type the name of the first waypoint into the scratchpad on the F-PLN page (example: ABV)
- Press the L2 button (the line currently showing a discontinuity) to insert the new waypoint immediately after the origin airport
- Observe the duplication of the origin and destination airports and the addition of the new waypoint after these new duplicates
- Attempt to delete one or both of the new duplicate origin and destination airports to attempt to fix the issue
- Observe that this action is not allowed
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are you using, if relevant:
n/a
[PC Only] Are you using Developer Mode or have you made any changes to it?
No
[PC Only] What GPU (Graphics Card) do you use?
AMD Radeon RX 7900 GRE
[PC Only] What other relevant PC specs can you share?
n/a
MEDIA
[END OF FIRST USER REPORT]
For anyone who wants to contribute on this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
•
Provide extra information to complete the original description of the issue:
•
If relevant, provide additional screenshots/video:
•
