hi,
i seem to be aving this issue on all planes which ever i fly, tbm, cj4, 172 etc…
When on AP the plane keeps banking to the left at a what seems to be 25-30 degrees.
Is there a known issue about this?
Usually the issue is that your joystick is not centered or has too small of a null zone.
my dead zone is set to 40% for rudder peddals and 25% for joystick, so i dont think this is the issue.
I’ve seen cases where 65% null zone wasn’t enough…
Do you get the banking when you unplug your joystick completely?
Looking at the provided screenshot the most common culprits are using Legacy flight model, conflicting inputs from another device, conflicting bindings on the same device, dead zone set too low, or “phantom” inputs from failing hardware. In the bulk of cases it’s been either the Legacy flight model or deadzone at fault.
With these extremely large deadzones chances are 99% that you are using the wrong, legacy flight model.
Switch back to modern.
hmmmm… i dont remember how to do this…
can this be done during flight?
Yes
Options > Flight model > modern
i will try that thanks
Modern verse Legacy needs to be coded out! Or it needs to be done by Aircraft Modder’s.
I have screamed backwards compatibility all my life but it won’t happen!
There’s more money to be made by big companies treating people like sheep!
https://www.google.com/search?q=you+think+you+do+but+you+don’t+blizzard&rlz=1C1CHBF_enNZ919NZ919&source=lnt&tbs=qdr:y&sa=X&ved=2ahUKEwjW3IXnzuTxAhU3wjgGHWrbDFMQpwV6BAgBECU&biw=2327&bih=1179
since you mention using pedals , make sure you don’t have rudder axis AND rudder left rudder right programmed.
MSFS does weird stuff when you have 2 commands doing the same thing.
So it’s rudder axis OR rudder left , right…