ISSUE DESCRIPTION: Wrong “blu arrows” to follow for departure taxiway
Description of the issue: When you plan a flight from LIML (Linate Airport) using Rwy35 starting from a Parking Medium Stand (number is not important) , using a plane like the Daher TBM 930, ATC sends you taxiing using taxiways B (Bravo) T (Tango) which is correct, but pressing L2 on the dualsense controller to show the blue arrows on the ground the arrows send you instead to hold short at taxiway G or J which is cross the taxiway T but both are wrong as they are used by planes to exit the rwy 35. the blue arrows should send you all along the entire T taxiway. Only there the ATC realizes that you are holding short, while if you follow the blue lines to G or J in the best case you enter rwy without authorization or worst case clashing virtually with other planes.
Coordinate or location of issue: LIML
FREQUENCY OF ISSUE
I tried 5 times and it happens if you start from parking medium stands. Of course if you start directy from the rwy this doesn’t happen.
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
-
free flight with Daher or similar
-
choose LIML RWY35 from PARKING 8 RAMP GA MEDIUM
-
whatever destination (IFR)
-
you setup the plane to start, listen to ATC which gives you the message “Taxi to and hold short rwy35, via taxiway B T”, activate L2 to follow blue arrows. as you can see from the picture the arrows sends to the right which is wrong way instead of going the green line.
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are you using: PS5 + Dualsense Controller
MEDIA
see above