Please help someone.
I use a logitech flight yoke, but I unplugged it to use the port temporarily for a hard drive, and when I plugged it back in, i have no power to the yoke.
There is no light on the clock part and it doesnt register on the PC.
Please help, doing my head in.
Check the USB end on the yoke for any damage, and try a different port. I have a Logitech throttle, and the light doesn’t power on until one of two things happens - I check the calibration using Windows “Setup USB Game Controller” applet or I launch MSFS.
There is no physical damage I can see,. I have cleaned the inside of the plug, It gives power to the throttle quadrant and there is no set usb game controller for the yoke.
I have a brand new Flight Yoke and Flight Rudder Pedals. I have tried to install them on my PC running Windows 10 (64 bit). The yoke doesn’t power on, the throttle quadrant shows it has power, and the rudder pedals don’t have power when plugged into the Flight Yoke. If I plug the rudder pedals into a USB port by itself, it powers on and the PC recognizes it.
2 Likes
I have the exact same issue, the yoke will not be recognized at all in device manager either. Did you manage to find a solution?