Logitech Freedom 2.4 -how to setup manually?

User Support Hub Hardware & Peripherals
1

I have tried to setup the Freedom 2.4 working nice in FSX to work similar in MSF2020 but it is hopeless… can anyone explain how to setup each parameter step by step?
I would really appreciate that!
Åke

2

Thanks to a Portugiese I was able to program the Joystick to work! Thanks!
Åke

3

how did you programe Freedom 2.4

4

I found a link that showed in pictures how to define the rudder, power and the elevator and the pitch settings, just by using the -axis setting:

Aileron axis: Joystick L-axis X only in the left column
Elevator axis: Joystick L-axis Y -"-
Rudder : Joystick R-axis Z -"-

Power: Throttle axis - Joystick slider X : For the Airbus in both columns!

On my own I changed under Sensitivity I put 5% dead zone and 50% sensibility.

Good luck
Åke

5

can u share the link pls

6

were u able to program the freedom 24 joystick ?

7

Yes , see above…how to

8
9

still not working for me . tried these settings.
still too sensitive and crashes in 4 seconds.

10

You need to check also the sensitivity, I have -80% and zero zone 5%

11

after the joystick is left for normal position the YOKE in the Sim stays in the turn position and doesnnt come back as per the joystick