I’m still just learning how to program and use the flight computer.
In the case of a Missed Approach I see that my flight plan does know what to do and take me to a holding location. BTW, I switch the Source for the Autopilot from FMS to VOR/ILS to catch the glidescope and land. Is that correct or would the FMS take the plane all the way with glidescope?
Anyway, if I can’t make the runway and continue do I just switch back to FMC control of the autopilot and it will take me to the holding pattern? Or do I have to use the DTO function?
Once in the holding pattern, how do I use the FMC to get back around to line up again with the runway? Would I add some more waypoints and use that DTO function? Does that work with this FMC?
Current example I’m working on: landing on runway 30 at KOAK, holding at Sausalito.
pete in san leandro, ca.
Correct to switch autopilot source for the ILS. Then in a go around it can go back to FMS and NAV mode will follow the missed approach waypoints to the hold. No need for DTO
But what I found when I did a missed approach in the ATR a few weeks back was that I no longer had a destination and had to do some serious fiddling in the nav computer to essentially create a new flight plan. Couldn’t help but feel that there was something wrong there when the destination should really be kept in the flight plan with a discontinuity between the missed approach and the destination to allow you to set up a new approach
BTW, if winds require it, on Approach I have successfully changed to a different runway in the FMC. I think I just typed the ILS label and inserted it over the previous runway. I suppose in the real world you’d be directed to another waypoint for the different runway and I guess I was able to insert that and go there with DTO. My choice wasn’t the best perhaps because my plane had trouble turning around at that waypoint and getting on the correct path.
But on a Missed Approach, once I’ve passed the runway (?) it does seem that I can’t go back to any part of the flight plan.
Or are we just missing something here with the FMC?
In the ATR42’s FMC, I found that I while in a Holding Pattern after a MIssed Approach that I was able to insert a couple of Waypoints AFTER the Holding line in the FMC, then I added the runway, for example, ILS30, here at Oakland Metr. Airport (KOAK).
During the Holding Pattern I executed a DTO to the Waypoint where I wanted to begin my Approach and it seemed to work.
So I did NOT have to create another flightplan with Origin and Destination, etc.
These are very few steps and you’ll have time while Holding!