Mixture Axis acts like it is being held at zero, visual manipulation of control is erratic (See video)

MSFS2020 PC
Microsoft Store version

Not using Developer Mode

Brief description of the issue:

When moving mixture level from value 0 to value 100 the mixture lever animation indicates briefly where the slider button(Slider X 11) on my Logitech X51Pro places it then instantaneously snaps back to zero.

Provide Screenshot(s)/video(s) of the issue encountered:
https://youtu.be/PJo5JjmJZu8 ← 1 minute video of issue

Detailed steps to reproduce the issue encountered:
Normal operating of Carenado 337 (Skymaster) and Mooney M21
*** I have checked in settings for multiple keybinds to the mixture control, none found. No other keys were mapped to any mixture controls at all.***

PC specs and/or peripheral set up if relevant:
17-11700kf, RTX3080,32GB 3600, 1tb NVME

Build Version # when you first started experiencing this issue:

Immediately after updating to SU8

Just tested again, issue not limited to Carenado, all aircraft with mixture controls are behaving this way, (I just fly a lot of Carenados)

You said you checked the other key binds, but as a suggestion, take a look to see if there’s a conflicting bind with any other peripherals. I found that issue a year ago where a bindings on my throttle was conflicting with a joystick bind. It only came to light after I had inadvertently bumped one of my throttle buttons and couldn’t get my flaps to stay down because the button on the throttle was constantly issuing an “up” command.
Regards

Thank you for the response!

All other controls detected (keyboard, mouse, and if connected Quest2 hand controllers) have no bindings associated to the entire Mixture page in control settings

1 Like

Happened to me as well after an update, and in my case it was not a conflict with other devices. While I am still not sure what caused it but I could resolve the issue through copy the device mappings to a new profile and delete the one showing the erratic movement. Hope this will also help you.

1 Like

Thank you for the response!

I will try this.

have you checked if the “auto mixture” is enabled in the “assist” options?

Yes, that box is clear.

1 Like

I have deleted ALL keybind profiles from the manager in settings, then recreated manually. that fixed it

1 Like

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.