NXCub Can't Set Active Frequencies

Bug Reporting Hub Aircraft & Systems
, , ,
1

ISSUE DESCRIPTION

None of the radios enable transfer from of frequency from standby to active.

If applicable, which aircraft is experiencing this issue:
NXCub only. CubCrafters X Cub radio not affected.

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
Yes

FREQUENCY OF ISSUE

Constantly, either starting an runway or cold.

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

  1. Start on runway or cold
  2. Turn on radios,. Look at active (white characters) and standby (blue characters) frequencies for all 4 (2 coms and 2 nav radios)
  3. Click on the frequency display box for any radio to bring up frequency entry window.
  4. Use soft keys to enter a standby frequency different than the active frequency. Click Enter button to set it in memory. The frequency entry window closes.
  5. Observe new standby frequency in the small box at top of screen. Click frequency box again to access Transfer function. Click Transfer button. Window closes.
  6. Observe that the Standby and Active frequencies are NOT exchanged (no transfer of Standby to Active).
  7. BUG: Frequencies are not exchanged.

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant:
Mouse, keyboard, 2 joysticks

[PC Only] Are you using Developer Mode or have you made any changes to it?
No

[PC, MSFS 2020 Only] Are you using DX11 or DX12?
DX12

[PC Only] What GPU (Graphics Card) do you use?
RTX 3050

[PC Only] What other relevant PC specs can you share?
Not Relevant

MEDIA

Please add a screenshot or video of the issue occurring.

[END OF FIRST USER REPORT]

:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
•

1 Like
2

Do you have the same issue if you follow the OP’s steps to reproduce it?
• YES

Provide extra information to complete the original description of the issue:
• Same as original description for NXCub

If relevant, provide additional screenshots/video:
•

3

Do you have the same issue if you follow the OP’s steps to reproduce it?
• Yes

Provide extra information to complete the original description of the issue:
• For me, the ATC window also complains "The electrical systems must be turned on in order to use the radio and speak to Air Traffic Control (ATC).
I have also tried the sim update beta, and then a reinstall. No change.
On the reinstall, I noticed all my settings had been retained, so if it is a setting I messed up, I dont know what it is.

If relevant, provide additional screenshots/video:
•

20250129114204_1
20250129114204_11920Ă—1080 287 KB

4

Can confirm that even using NRST then selecting any Nav paid, or airfield, going to Freq, page.

Selecting any listed also only sets in the inactive slot. And all ways to switch active Freq. dose not work.

5

To me, at least, this seems like a pretty serious issue.

I really wonder it if hasn’t drawn more attention because it’s associated only with a “lowly” Cub rather than one of the more popular jet-liners…
Or???
But receiving only 7 votes after all of this time is kind of discouraging.

6

Do you have the same issue if you follow the OP’s steps to reproduce it?
Yes

Provide extra information to complete the original description of the issue:
Exactly as OP describes - the XFER button on the display is non-functional when you click it.
Tested in SU1 Beta build 1.3.24.0.