Hello, hi hi,
just got and build my first cockpit setup (MCP and Pedestal) and got several components running with SIOC and Oi4FS.
So with Default planes (without 320, 747, 787) I got the MCP, COM, NAV, ATC working.
I’m struggling with ADF
ADF: both displays are showing the correct value like in the simulator and also switching active/standby is working by pressing the ATC key.
But the rotary is not working, so I can’t adjust the value from hardware.
Nothing happens - neither on the hardware nor within simulator.
Further ADF/ANT and TONE is not working.
Within sioc monitor all is working well.
Var 2822, name bADF_TFR, Link IOCARD_SW, Device 10, Input 6, Type P
Var 2103, name sADF_MODE_SEL, static, Link IOCARD_SW, Device 10, Input 2 // ADF
Var 2105, name sADF_TONE, static, Link IOCARD_SW, Device 10, Input 7
Var 2826, name ROT_ADF_SW, static, Link IOCARD_ENCODER, Device 10, Input 0, Aceleration 1, Type 2
Var 2827, name ROT_ADF_SF, static, Link IOCARD_ENCODER, Device 10, Input 4, Aceleration 1, Type 2
Var 0554, name D_A1Act, static, Link IOCARD_DISPLAY, Device 10, Digit 0, Numbers 4
Var 0555, name O_A1ActDp, static, Link IOCARD_OUT, Device 10, Output 20
Var 0556, name D_A1Act5, static, Link IOCARD_DISPLAY, Device 10, Digit 4, Numbers 1
Var 0551, name D_A1Stb, static, Link IOCARD_DISPLAY, Device 10, Digit 5, Numbers 4
Var 0552, name O_A1StbDp, static, Link IOCARD_OUT, Device 10, Output 21
Var 0553, name D_A1Stb5, static, Link IOCARD_DISPLAY, Device 10, Digit 9, Numbers 1
Can someone help me with the correct SIOC settings?
Greets
Christian