Can anyone help this old man, I have the Honeycomb Alpha & Bravo create a new profile for the PMDG 737 MSFS 2024 version. All seem to work except for the toggle switches on the Alpla and Bravo the only switch I got to work was the parking brake on the Bravo. Flight controls and trim on the Alpha work. Throttles, reverser, spoilers, flaps and auto pilot does work but the indicator lights don’t. Can anyone help with the switches on the Alpha and Bravo. Not using MobiFlight or SPAD.neXt do I need one of them and is it better. I am not a computer wiz.
Check here: https://forum.pmdg.com/forum/main-forum/cockpit-builders
Mathijs Kok
PMDG
There are some very good youtube videos from Simhanger about how to set up Bravo.
There is also a lights download from Aerosoft.
Seen all of them old MSFS2020 and the new once of a few weeks ago. Great for all the default aircraft but not the PMDG 737 2025 for MSFS 2024, even contact Mark to ask if would be making a new video but he respond that he would not for the time being. Thanks for your reply.
Thank you for your reply, I will review the information and apricate your time.
do you need help?
Always need help! LOL
Same issues. these problems never go away --Honeycomb!!
-
Did not find a single PMDG reverse thrust configuration setting that works -after release of SU4. Even after two days of setting according to uTube videos.
-
None of the Bravo lights work any longer. Contacted Honeycomb and Aerosoft, Got answers that the latest patch by both, does not work when fs2024 is installed on another drive!
Frustrating….Three companies are involved, each points a finger towards the other!
Have you had help from Cedric at Aerosoft? He is absolutely the person to talk to. Nobody knows more about those set-ups. You can also see if any of the users at our forum have dealt with it: https://forum.pmdg.com/forum/main-forum/cockpit-builders
Mathijs Kok
PMDG
Did you watch Simhangars latest video on the Bravo? I think he identifies that Asobo have changed the reverse thrust settings, if I’m correctly recalling. He has done 2 newer videos on YouTube, the first covers turboprops and I think was within the last 3 months. Hopefully that will resolve the issue. Sorry if not
The reverse don’t work here…. In 2020 it was working
I don’t know who I talked to at Aerosoft. But both, they and Honeycomb said, they have no planes to rewrite the Bravo lights driver, to accommodate FS2024 installation on another drive.
As for the PMDG thrust reverser, after spending two more days trying every possible suggestion It still does not work.
I have try this many, times I also have honeycomb bravo throttle system. This not working…
I have seen this working with many customers so it is for sure possible. As we do not have this hardware it is not possible for us to try this ourselves, but I found it worked for one customer doifn this:
1) Rebind your throttle axis to “Throttle Axis” instead of “Throttle (0-100%)”.
2) Click the gear icon next to the binding and select “Invert Axis”—this ensures idle is properly aligned at the detent.
Now your detent will act as a proper idle (0%), and full throttle will be 100%. Anything below the detent will engage reverse thrust mode, but it won’t apply power to it just yet. Dropping the throttle past the detent toggles reverse thrust mode at 0% reverse power.
- To increase reverse thrust, move the throttle back up past the detent—this gives it power in reverse.*
- To return to normal thrust, drop the throttle past the detent again, then bring it back up normally.*
Unfortunately, the Honeycomb Bravo reversers are not the only ones which are not individually axis enabled, otherwise they would allow us to modulate the reverse thrust realistically: they are simple switches. This means having to modulate reverse using the normal engine forward thrust levers is a load of <<#expletives>>
As I said before, you might try to ask people in our forums: https://forum.pmdg.com/forum/main-forum/cockpit-builders
Mathijs Kok
PMDG
Thank you so much, Mathijs. –first clear instructions. Without doing a thing to the thrust reverser setting on Bravo
Works well.
Thanks again
Most welcome.
Mathijs Kok
PMDG
Hello, I also have the Bravo Throttle and jsut got the PMDG &#&-800, I start with a clean/empty aircraft profile set up the Speed Barkes, Throttle and Throttle reverse flaps using a video based on the PMDG 777, MSFS 2024 PMDG Honeycomb Bravo Basic Configuration everything work excepts for the light and toggle switch but did get the parking brake to work. I don’t use and third party app like spadnext ot mobiflight. Good luck