Keep getting a Trojan threat when downloading.
Iām also getting a āTrojan detectedā warning from Windows Defender with the latest virus definitions installed: Trojan:Script/Ulthar.A!ml
Just an FYI - i use ESET and dont get warnings.
1 Like
That doesnāt sound too good to be honest - Iād rather have a false positive than a positive Trojan.
Check your defender version, update it and follow the procedure given here: Mandatory update.
We got false positive detection in the past but not for this file.
Tested on defender 1.381.474.0
1 Like
Thank you, I just updated to āSecurity Intelligence Update for Microsoft Defender Antivirus - KB2267602 (Version 1.381.481.0)ā and GTN750 V2.1.60 downloads perfectly.
2 Likes
Since V2.1.60 - the Map canāt be accesed nor the Flight Plan, they are not greyed out but clicking on them doesnāt open the respective pages, same for PROC
Any one else?
EDIT: same for the NAV in the upper right corner of the unit. Clicking them doesnāt activate them to change NAV frequenciesā¦
Hello,
did update to last version .60 and all is working perfectly to me, also did update of Senecaās GNS replace. Can access to FPL, PROC,ā¦
Maybe some addons conflicts (with WTT GNS installed and not added fix), I recommend read all in PMS site or wait for Scorpions advice.
This is beacause you have probably installed the WT GNS530.
Please read that: WT GNS530 Compatibility
Update here 
just started another flight after last update and also had same problem, canāt click on any things on GTN, no working. I needed go to Main menu and start again my flight, then all is ok. No any issue with my previous version .55 and also old Seneca WTT. Also after update for first time from.55 to 60 all was ok at first flight. No WTT GNS installed, only PMS GTN and new version of Seneca WTT. Only reportā¦
I think you have the WT GNS530 running. install our patch to be sure.
1 Like
Hi,
no donāt have it. No problem, to me looks like some sim issue because after going to Main menu and start again, all is ok to me.
Thank you very much, solved 
1 Like
NEW GTN 750 RELEASE V2.1.61
- Better WTT mode detection.
- Removed the āImport from ATCā button because it doesnāt work well with the WT GNS530 for now.
- Few bug fixes with GPS switching.
4 Likes
NEW GTN 750 RELEASE V2.1.62
- GPS hot swapping: compatibility with WT GNS530 1.0.4.
Sorry for this new update just one day after the previous one.
If you are using the WT GNS530, think about updating our patch for it otherwise you may have an unresponsive GTN750.
4 Likes
Hello,
very sry, I need report very strange functionality after few last versions, I did tests to be sure that it isnāt only last version. Situation. Did many flights with delete FPL after each flight with no close flight via Menu. Really hard to say where this issue was started but generally with create new FPL and fly SID/START/APP with no problem till wrong functionality flight. Then this problem has started. Craete FPL (Origin/Destination) ok but after set SID I saw strange problem that init SID track from rwy to first fix is highlighted but final SID fix is set as (from) DCT to my destination airport. Simply navigation track was not set same as highlighted track. Ok, due my experience Iāve set DCT to with FPL option and set there first SID fix but after Activate nothing. What more worst, NAV with GPS was not functional although I want click NAV button only HDG was functional at AP of Seneca. No delete and again set new FPL helped, no chance, NAV GPS option on AP canāt be set definitelly, only VLOC with ILS and pure NAV with VOR freq was working, then I was lucky that in pure weather I was able land 
I donāt know, for sure I want say I donāt have WTT GNS530 installed, only PMS Seneca WTT last version integration in cockpit and last GTN 2.1.62. To me I see maybe problems with LEG activation inside SID also. I had also some problem with double same fix as destination airport and no possibility to delete one of that, very strange after logical manipulation with GTN DCT to and set via FPL or as FIX. Really that existed DCT to track in case I set it, is needed better delete via DCT to menu but I donāt understand why to do that. This and many other strange behaviours started with new WTT in sim changes, not with WTT GNS530W. No problem with any details.
Iāll try test older versions combination so Iāll report maybe possible findings.
I installed the Working title 430/530 upgrade on the microsoft marketplace. afterwords, flying the analog steam gauge king air, it would lose track of the nav path.
I uninstalled the 430/530 upgrade and now navigates fine.
Anyway to fix this, the fly inside Bell Jetranger helicopter needs the upgraded 430/530 from working title to turn on?
1 Like
Working Title has to fix their product, or make whatever is causing the problem default so it is used by the other products.
1 Like
Hello all,
pls think, looks like you missunderstanded all. This isnāt depended to WTT GNS530 as base of problem, this WTT GNS is best thing after while what I see inside sim, also GTN750 as this Topic is about. Hope Iām not wrong but WTT implemented in sim new Autopilot functionality, behaviour and to this new thing all need to be updated, fixed. From this base system all wrong functionalities starts, not wrong step but now this time comes, all devs who need to do this, need probably do corrections inside their products. We can expect maybe only stock sim airplanes functionality logically.
Ok to GTN750, I did some test flights yesterday and discovered minor wrong functionality with old version 52??? but no same problem with this version as I reported previously. Will do next tests as Iāll have time.
Again to all pls although Iām not Topic creator, donāt post problems with only WTT GNS530 here, this topic is about fantastic GTN750.
Spot on, I am going to remove it tooā¦ either switch back to the GNS530 which worked fine or default, the G1000 is great the 530 not so much, yet.