Is it just Fenix and FBW that have this issue? My thoughts is to look at sensitivities to check the axis’ and see if there’s any irregularities.
Out of interest, are you using rudder pedals or twist stick?
Thanks, but all that has been mentioned in earlier posts, pictures of controllers likewise.
Hi sevenflyer hope your well. just got in so im logging into MSFS now to check the default aircraft Ok. Im pretty sure they was ok but its well worth checking.
1 Like
Ok just checked the Default aircraft and they seem ok they stay straight on runway taking off too. and turning. Talking about ailerons is this what your asking in this pic. where it says ( JOYSTICK L-AXIS X ) when I move my joystick left and right it lights up white.
1 Like
Have you tried with all other addons removed (community folder and content manager ), and only the FBW A320, to confirm this isn’t some odd mod conflict?
If so and the issue persists, I recommend you post the issue to the FBW discord:
1 Like
Ok so shall i move everything out of the community folder and just leave the FBW A320 in is that what you mean? I could try that.
Thesevenflyer my partner has just helped me move everythingout of the community folder so now its empty But we have left the FBW A320 in there Only. so just going to Restart MSFS Now. see what happens.
1 Like
Hi sevenflyer just started up again seems no change. I have no steering, nose wheel not turning either. but if I put autorudder on in Assists i can just about steer it but really sensitive at that only have to move the joystick slightly and it turns quick. But I would rather have it flying how it should and how they want us too. I noticed too in cockpit the Tiller not moving at all its all very annoying and stressful after all your good time helping me out and I appreciate it Greatly mate. everything was so fine with the FBW plane when it came out and now its just getting hard to keep up with all these changes. I think its me Not understanding all this Binding stuff etc and that does make it hard for me. does anything need to be put in that nose wheel setting in controls?
The Flybywire website has a very comprehensive set of instructions which I suggest you work through. Maybe delete and re-install through the FBW downloader to start from scratch is the best idea. Also set your sim settings back to default. That should then clear out any spurious settings etc that are causing your problems.
1 Like
Changing the settings to default will enable the piloting assists and compound the issue.
I wouldn’t recommend that.
1 Like
Ok. definately wont switch back to Default. but uninstalling FBW and reinstalling can that be done through there website just want to make sure.
If you have the FBW, you should have their installer, use it.
If not here is a link to it.
1 Like
Ok cheers for that sevenflyer much appreciated. just a Quick one before i do a fresh install will I have to take everything out of the community folder to do with FBW first. or will it just go.
The installer, when pointed to the installation ( in your case Community) folder location will look after removal and reinstallation.
1 Like
Ok Great. I will do it a bit later or in the morning and once again Thank-you very much for the Help and your time. I will let you know Tomorrow how i get on with it. Dinner now . have a great evening sevenflyer.
1 Like
The best practice is to have separate control profile for every aircraft you fly. I see from your screenshot is that it looks like you’re just using the same profile for everything. This can cause issue because Fenix needs the controls to be setup differently from the FBW A32NX, then PMDG 737 also needs the controls to be setup differently from the others.
My suggestion here is, create multiple profiles for your controls. One for FBW A32NX, one for Fenix, and one for each different aircraft that you like flying.
This way, each profile can be setup to work exactly how it should for each aircraft. So when you want to fly the fenix for example, all you need to do is go to the controls, and switch the profile to Fenix, and all the control configuration that work with Fenix will be loaded and you’re good to go. Same thing when you switch back to flying the A32NX, all you need is to switch the profile, and all the configuration for the A32NX will be loaded instantly as well. So you won’t need to fiddle with control issues every time you switch aircraft that’s designed to be set up differently.
1 Like
Hi there sevenflyer I have done a clean install of the FBW installer this morning. first I went in to downloads folder and deleted old installers of it then went into community folder and deleted the FBW a320 and did a clean up and a restart of the PC. I have installed the FBW a320 from there installer Now just before that a message came up saying Amibitious tool bar can cause issues so i thought Oh this must be the problem. so I took ambitious Toolbar out of community folder. then all installed Great. FBW a320 back in MSFS. but its all the same its not steering again still got same issues. nosewheel does not want to turn and the tiller is not moving at all wether disabled or enabled.
Hi Neoking yes maybe thats right. does flybywire have instructions on every setting to do? I think I seen it somewhere before.
There’s this place at least, but it probably doesn’t have everything you need. Other places you can find is youtube.