Does anyone know if there will be a new update for the Honda Jet soon? Since the last Honda update, the center of gravity position can no longer be adjusted, so a start is unfortunately impossible 
1 Like
I would like to know that as welll since there are a lot of things that I feel need updating. Unfortunately, there doesnt seem to be a central point for information or feedback (i.e. website or forum) for this product.
Definitely something I will take into account next time I am considering buyning a 3rd party plane.
1 Like
The answer you seek is but a few posts above.
2 Likes
I got the HondaJet from the Marketplace and fly on a PC. I have never been able to get the Logitech Saitek flight panels to work correctly with the HJ. I do not use spad.next and the HJ is the only plane that I have experienced this problem. Is my problem isolated to me or is this a problem with the HJ?
That’s strange. I have the Logitech Yoke/Throttle Quadrant and the Multi Panel for Autopilot, and it works out-of-the-box for me on the H-Jet with no problems. The only aircraft it doesn’t work for is the CJ4 WT, which is expected.
The Multi-Panel is a bit odd, as it doesnt’ show up in FS in the Controls Settings dialog, but it loads a driver into Windows when FS2020 is launched. Sometimes that driver doesn’t launch automatically and the display for that panel is dark, but I can launch the driver .exe manually (with I think a “-r” command line argument) to usually get it to light up.
Thanks…it must be me. It is the Multi Panel for Autopilot that I have issues with on the HJ. It does not want to set altitudes and sometimes it just goes crazy randomly changing the altitude and the Vertical Climb. I will have to fiddle with it some more. I don’t fly the CJ4 but all other planes, I fly, seem to work fine.
What should the current version of the plane be ? Mine says it’s up to date on version 1.0.4 which the info panel says was released in January, that doesn’t sound quite right ?
I just bought the HJet and I have the shimmering vertical speed dial. The dial also does not work at all. Did you figure out a fix for this, Majorbash15?
Can I please get an invite to the HJet discord (if there is one) I’ve found 2 links so far, both come back as invalid
it does have one IRL
Any update from their discord channel?
They submitted the code this week but just missed a deadline, so next Thursday (Sept 1st) is when we’ll see the update.
Yeah this is one plane I wish wasn’t released on the marketplace and we could just manually update it by dragging to the community folder, taking the whole review process out of the equation.
It’s rough as heck waiting for this update.
1 Like
In case you’re not on the Discord, they are A GO to have the updated V1.0.6 pushed to the MSFT marketplace tonight, probably around 5pm Redmond time. There are a significant number of updates…I’ll try to post the list here when I get to my other machine.
2 Likes
The Big List:
New features/Functionalities:
-Added new GTC page “timer” home=>utilities =>timer
-timer on PFD is now operated and synchronized with “Timer” controls in right GTC
-Added new GTC page “Minimums” home=>utilities =>minimums
-PFD now shows minimums value, as well as minimums bug on altimeter tape
-Added altitude callouts sounds 1000,500,400,300,200,100,50,5
-Added new GTC sim options page “Manual” home=>Sim Options=>manual tab, this contains QR code
for HJET documentation, tutorial video and discord support
-HP/IN button on backup display is now functional
-IDENT button on right GTC is now functional
==New persistence for HJETs state and setting:
-SimOptions are now persistent, if you leave doors open, shades, static elements, ground power, etc.,
will be loaded next time you start a flight
-PFD options are now persistent and will be saved between flight, settings include: FD cue options, Wind
display option, HPA/hg
-cockpit knobs locations are now persistent between flights
-Misc. cockpit interactions are now persistent, sun visors, toilet door .. and Roofus
-Added 3D passenger models depending on load manager, option to show them added to Sim
Option==>SHOW 3D PAX
Autopilot and avionics:
-Fixed FD needed to be engaged first prior to engaging AP, now pressing any AP mode will engage flight
director, and flight director is always ON if AP is activated
-Added option for dual bars Flight director - the user selection will be save and persist for later flights
-Fixed VNAV info on MFD inset getting stuck and persistent from flight to flight
-VNAV is now disarmed when an approach mode becomes active.
-Redid logic for loading approach and STAR altitude restrictions, now should be consistent and less
prone to errors, VSD and GTC should match up when it comes to alt restrictions
-Fixed and redid code for STAR altitudes restriction to account for complex STARS that were causing
freezes of the VSD
-All automatically loaded altitude descriptions will now show on left GTC when loaded.
-GP (Glide path) is now custom calculated, should be smoother now and will be correct from the
beginning for the approach.
-GP & GS Logic updated, and is now using custom logic
-Tweaked PIDs for vertical modes for more accuracy
-Redid autopilot handover modes, now shouldn’t allow to revert to LVL when navigation is lost, if
switching from GPS to LOC, nav mode will be maintained
-No more auto activation of NAV1 mode when following GPS, user has to manually change to NAV1 to
follow GS/Localizer
-ILS frequencies are now auto loaded when an approach is loaded, user no longer need to do manual
entry
-FIXED VREF and VAPP flags are shown 5 kts lower that they really are on the Airspeed tape.
-Overspeed warning will now sound at correct speeds
-Landing gear warning will no longer sound when idling and no flaps deployed
Systems:
-Synchronized the sim’s master caution and warning variables with the HJETs warning variables for
compatibility with external hardware
-AP disconnect button on pilot yoke is now functional and clickable
-Added reset all button to checklist menu
-If finishing all the checklist items until shut down checklist, the checklist system will reset and will revert
back to “BEFORE STARTING ENGINES” checklist
-Corrected Bug causing synoptics display to freeze and throttles to cease if scrolling past “SHUT DOWN
CHECKLIST” page
-Corrected a bug where the center fuel quantity shows only main tank quantity without the bladder
tank, now shows full center tank quantity
-Door indicators for AFT and FWD cargo doors now works in synoptics status page
-Added “LIGHTING CONFIGURATION” page to right GTC, where screens and buttons brightness can be
changed, Changes are persistent between flight sessions: Home=>Aircraft Systems=>System Controls
=>Lighting Config.
-Corrected a bug where user cannot enter 0 in comm frequency in right GTC
-fixed right GTC comm radio accuracy can only be to two decimal places
-fixed alignment of button labels in bottom PFD soft key labels
-FIXED VREF and VAPP flags are shown 5 kts lower that they really are on the Airspeed tape.
-Fixed issue where HJET would keep toggling seatbelt and no smoking signs, now are properly linked to
the sims default vars for compatibility with 3rd party programs like self-loading cargo
-Fixed text alignment on “STATUS” synoptics page for hydraulic percentage and Oxygen level
-fixed LFE sometimes displaying in metric value
-fixed FD not deactivating if in GS mode.
-fixed text alignment in Electrical synoptics page
-Fixed a bug where Generator1 bus would show current if cabin power is engaged, even if Generator1 is
off
-fixed bug where NAV lights and landing lights are shown on 3D model even if no power is established
Sound:
-AI HJETs should no longer sound like a piston aircraft
-Revised all annunciations, now a female voice
-Added altitude callouts
-Corrected ISA deviation reading in PFD, now reads correct temp. deviation and is easier to relate to
performance charts
-Autopilot disconnect sound now working
Misc.:
-VFR camera PBH angle adjusted for improved VR experience
-Added collision mesh for better VR interface (WIP)
-Doors will be forced closed if engines running or in flight
-Fixed CG out of limit message in sim UI
Visuals:
-Significantly Improved shadow rendering definition in the cockpit and cabi
9 Likes
The HJet is now also available from outside the marketplace:
3 Likes
What happened to the update? Didn’t see it in the blog, or am I blind?
This is in the FlightFX #Hjet-general thread in Discord. Per the latest, the update was available starting about an hour ago. I’ll load it once I finish my dinner and walk the dog. #Priorities 
1 Like
Thanks! So it will be available on the Xbox Marketplace? I thought it was only updated once a week?