ISSUE DESCRIPTION
CTD after applying ATC assigned approach via EFB in VIP Charter Mission FVI39 KINW-KLAS in Cessna Citation CJ4
Did you experience this issue before you joined the Beta?
Newly generated mission so not available prior to beta. Although my number of CTD’s has increased from 0 to 10+ since entering Beta
[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
No community mods installed. Full Vanilla beta install.
FREQUENCY OF ISSUE
How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Intermittently across all flights. This scenario, consistently.
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
Select currently available VIP Flight FVI39 KINW-KLAS in freelancer portion of Career Mode in Cessna Citation CJ4
Fly mission according to prompts and plan supplied in EFB.
After STYXX you will be given instructions to fly ILS approach. Approach assigned will be using CROWE transition rather than the FLYES transition in original flight plan.
Active pause the sim.
Enter EFB, Switch approach procedure to CROWE, hit buttons to file plan with ATC and Send Route to Avionics.
Click on (i) for destination airport KLAS
Click on the Charts icon under the purple highlighted menu.
Select Approaches Tab
Select ILS Z or LOC Z26R and click on the chart button.
spend a minute or two inspecting the chart. Close chart and go back to route page on EFB.
Cancel active pause
Continue flight, climbing to 26000ft as requested by ATC. Before reaching Altitude or CROWE waypoint, system will CTD.
Looking at HW monitor. All temps are low accross the board.
Resource monitor shows no excessive CPU or Memory usage
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are you using, if relevant:
Logitech EXtreme 3D Pro Flightstick
Logitech Rudder Pedals
[PC Only] Are you using Developer Mode or have you made any changes to it?
No
[PC Only] Many issues may be due to an outdated graphics card. Please state your Graphics Card Driver Manufacturer (NVIDIA, Intel, AMD) and Version:
NVIDIA RTX 3070TI
[PC Only] What other relevant PC specs can you share?
CPU: Intel I5-13600K
Disks: FS Dedicated SSD with 500GB free space with Windows installed on seperate SSD with 1.5tb free space
RAM: 64GB DDR4 3200
WIN 11 24H2
FS2024 Installed from MS Store
No FS2020 Installation
MEDIA
Please add a screenshot or video of the issue occurring.
[END OF FIRST USER REPORT]
For anyone who wants to contribute on this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
•
Provide extra information to complete the original description of the issue:
•
If relevant, provide additional screenshots/video:
•