Anybody having problems with rudder pedals why moving the plane on the ground ???My MFG crosswind pedals are acting funny when on the ground .If you put the rudder pedals full to the right ore to the left they comme back to center and start going from left to right on its own,The strange thing is when flying rudder is working fine . only on the ground they act funny ,the plane is not ussable for ground handeling ,i checked the rudder in flight and its working fine
I’ve got the MFG Crosswind; I don’t experience those issues.
However, the rudder is extremely sensitive and precise - You might want to recalibrate and increase the center deadzone using the configuration tool (I’ve got mine set to 80).
Alternatively you could adjust the sensitivity for the left/right movement within MSFS to ± 50% to lessen the rudder displacement near the mid-point.
1 Like
The funny thing is ,in the air rudders are fine its only on the ground
And i recalibrated the peddals ,it started doing this after the last update.
Sensitivity is always at 50%
Deadzone 10% 
80% seems to much dead zone for me 
Oh, apologies; I thought I had set up different values in the tool. Had another look and this is what I’ve set up:
My settings in MSFS are defaults for sensitivity/deadzone.
Are you perhaps experiencing propellor effect?
Check that under options > assistance > piloting the take-off auto-rudder is on/off.
If it is off, it will simulate for prop aircraft to pull the aircraft to the left when applying thrust when on the ground, which you then have to counter by applying rudder.
2 Likes
No issues here with MFGs… sure you haven’t bound them to rudder left/right rather than rudder axis? If the former it’ll behave like a keyboard rudder and could explain some of the weirdness.
Its bound to rudder Axis ,auto rudder is off,it has nothing to do with the torque pulling to the left.
If you look at the rudder when on the ground it vibrates from left to right its acting weird.Pedals are ok i tested them on my Xplane11 .It starting doing weird after the last update
I will have a look in the Mfg software , its no prop effect even at zero speed if you look at the rudder its vibrating from left to right if you give somme input on the pedals.
Thanks its working fine now ,i used your settings in the MFG software and put the sensitivity in the sim on default.
Great help so happy its working now thanks
1 Like
Great to hear
o7