Hi, how/where did you get 8.0.290 when their site has only 8.0.285 available?
Scroll up a bit⌠I had the same question:
Jim-Sim
And itâs working very well. Thanks JimSim831 .. 
Thank you for this. The program worked great and my Seitek AP panel now works.
Awesome. Thanks.
If you change ALT with mouse/keyboard does the AP reflect the new value immediately?
Thanks in advance.
Hello to all,
CaptainLIF have been helping me on another thread, but we couldnt find a solution yet. My AP multipanel is still not working properly.
Once I roll the knob it starts jumping from 100 ft next is 200ft at a time , with the speed/heading happens just the same, first is with a increment of 1 then of 2 per one click. I read that the same was happening to several people.
I tried everything, uninstalling all the plugins previously used, removing the folder, installing the last driver from Tr1cky, using the plugin for the usb power saving config. Now I am trying with SPAD.next and i could at least see that is not a hardware issue, because i got the VS speed working on the desired 100ft steps for a time, while the altitude menu was still missworking. Maybe is a problem that i am not configuring the SPAD prperly, but I cannot see what I am missing.
Does anybody have any idea of what else can I try next?
Thanks in advance to all
Yes, it did work like that for me, until it started failingâŚ
I use it on MSFS2020
Hi,
If after following all the advice in that other thread, you are still having issues I would seriously consider the idea that your panel is faulty!
Do you have a friend, preferably someone who is already successfully using the same panel, who would let you hook it up temporarily to see if the problem persists?
Hell, if having exhausted all posibilities you are still stuck, post it to me, and I will check the â â â â â â thing for you! 
2 Likes
hi all.
all my logitech panels and flight instrument panels are working fine with the latest msfs update.
remember you need to download a different driver for the instrument panels as the logitech msfs patch does not work for them.
you need flight instrument panel x86 driver 8.0.150.0 google that as its a free download on sites.
make sure your instrument panels are not connected by usb until instructed to do so in the installation.
reset pc once done
Yes you do need indeed need different drivers for your FIPâs.
But NOT for the Multi,Switch or Radio panels! For these use Tr1ckiesâ updated MSFS 2020 Plug in! NOT, the now obsolete, drivers to be found at the Saitek [Logitech] website!
Iâm running the latest driver (from Tr1cky), and my Multi Panel seems to be working better.
The only problem I consistently have is with my Radio Panels.
Iâm running two of them and the displays have a mind of their own.
They are set to Com1 and Com2 on the upper unit, and Nav1 and XPDR on the lower unit.
But regardless of what those switches are set to, they often display the wrong information until I switch them from their current setting to something else and then back again. That seems to flush the display and set it back to what itâs supposed to be showing. Unfortunately they donât stay that way. Iâm guessing that if I wasnât running two of them, I might not even see this issue.
Any thoughts?
Jim-Sim
i have a radio panel and switch panel. both work with the a320nx but the radio panel only changes frequency in 0.01 increments. is there something iâm missing to set to get it to change in 0.125 increments? when i fly the ga planes i just have to change a setting in the gps and it works fine there.
Nope, I dont know anyone using the same panel, but I will try it on another PC.
Last thing I could see today is that using SPAD the knob jumped twice each time I rolled it.
Where are you from? I am from Spain⌠I am sure that the mailing fee would be pretty high for such a box⌠but thank you so much for all the effort! I really appreciate it.
Best regards!!
It does work for me each time, yes.
Ah, sadly [for the purposes of your posting anything to me, at least] I am in the UK [or the
DK - Disunited Kingdom - as I now refer to it].
Pity! Your problem is, I think, annoying me as much as it must be annoying you!
Very sorry.
Ok! Today I know for sure that is not a hardware issue. I installed SPAD.NEXT on another computer and the knob works just fine! So at least I don´t have to send the device to the Logitech tech support.
After seeing this reply on the other thread:
I realized that my AP panel was working fine til I started using the new Alpha Yoke⌠So I am pretty sure that is something related with the new driver of HoneycombâŚ
Thatâs odd. I have just spent a couple of weeks working with him to add BIP functionality to his AAO.
He was unbelievably helpful, and great support . I now have a version that supports my BIP as well as the other Saitek stuff . He was just talking about updating the manual etc etcâŚ
I have a issue, the adjustment for alt jumps 1000-2000 at 1 click sometimes 1100 (random)
On the multi panel
Other like heading jumps 10 at the time?
Is there any here with a solution for that ?
Thanks for your help
Erik L
This is a common problem for those with Honeycomb yokes. I believe it also affects Warthog users, and presumably Saitek X52 sticks. Something to do with toggle switches.
If you unbind all the switches on the yoke you will get your 100feet/1 degree increments back.
Not ideal, but the only other fix is to bind those switches with an external tool like SPAD.neXt.
2 Likes