[SOLVED] All planes banks to the right without input

User Support Hub Aircraft & Systems
, ,
1

:wave: Thank you for using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.

Are you using Developer Mode or made changes in it?

Yes

Have you disabled/removed all your mods and addons?

Yes

Brief description of the issue:

After 5 minutes of flight or after doing some strong manuvers my plane starts banking to the right without input and it becomes uncontrollable

Provide Screenshot(s)/video(s) of the issue encountered:

NA

Detailed steps to reproduce the issue encountered:

Start a flight, fly for five minutes or do some strong/big manouvers and the plane will start banking until it becomes uncontrollable

PC specs and/or peripheral set up if relevant:

Nope

Build Version # when you first started experiencing this issue:

a bunch of weeks ago

:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

3

Which aircraft?
Are you switching fuel tanks as needed?
Make sure flight mode is set to modern, not legacy!
Are you using a yoke or joystick?
If so, it may not be returning to center and/or you need to increase the dead zone.
Same for rudder and aileron.
Check your mapping for duplicate aileron or rudder controls

4

Most prop driven aircraft have the tendency to pull and bank to the left. Do you have trim axis’ setup for rudder, aileron and elevator trim? Even in MSFS planes that IRL don’t have an aileron trim you can still trim in the sim for some reason. Adjusting trim in flight is normal and you have to do it fairly often depending on wind direction, aircraft power and speed, and AOA when climbing and descending. Jets are different though I would not be surprised if they behave this way in the sim.

5

Every single aircraft. I use a joystick and I tried to change the dead zone but it’s still the same

6

It happens also to, for example, the G6000, A319 and E170. I tried also to turn off the winds but nothing, they all start banking to the right after like 2 minutes or after doing some big manouvers.

7

I think I would probably start with ensuring the controller in question is showing to be properly calibrated in windows and maybe see if it is still ok after the problems starts to occur in the sim.

Would not be a bad idea to check through your assignments for all devices and make sure you only have one active to ensure there are no conflicts. E.g. if you have both a joystick and yoke connected make sure only one of them can control the aircraft.

What you have described does rather sound like a conflict of controls.

8

Tried to recalibrate my joystick but the issue is still there, now I’ma cheeck the controls assignments

9

The problem is solved, it was a control assignment Problem. Thank you everyone for helping me

1 Like
10

Remember to mark your post as Solved, it helps everyone else :slight_smile:

2 Likes
11

How did you solved the problem?

12

It was a control assignment problem. I had my joystick assigned to two different controls and one of em made the plane bank more every time I bank to the other side.